Sie sind hier : Startseite →  Hifi Magazine + Zeitschriften→  (32) US "off duty"→  US off duty - 1972-intro→  off-duty-1972-10 - Receiver Liste

"off duty" 1970 - 1997 - eine Freizeit-Zeitung für's US-Militär

Die in diesem amerikanischen (Freizeit-) Shopping-Magazin angepriesenen Hifi- und Video-Produkte waren auschließlich amerikanischen und kanadischen Militärangehörigen zugänglich - also zu kaufen - und vor allem zu ganz ungewöhnlich (verblüffend) niedrigen US $ Military-Preisen. Zu der einführenden "off duty" Seite geht es hier lang. -  Um 1970 begann der weltweite Hifi-Boom bis zum 1. Crash 1978 und dann wieder zum 2.Crash um 1990. Über die 20 Jahre nach 2001 lesen Sie mehr in den Kolumnen auf diesen japanischen Seiten.

.

Eine schwierige Beurteilung - diese Listen - also aufpassen .....

Das "off duty" Magazin ist genauso ein Werbeblättchen wie die bekannten amerikanischen Audio- und Hifi-Zeitschriften US-AUDIO oder Hifi-Review oder Stereophile oder Stereo-Review. Nur, die Zielgrupe ist eine gänzlich andere, nämlich überwiegend das US-Militär im Ausland. Und die Militäradminstration schreibt die extremen und unglaublich niedrigen US$- Preise vor.

Dennoch, hier in diesen Listen werden nur die (also solche) Geräte und Hersteller aufgeführt, die auch dafür bezahlt hatten !!! "Wer nicht bezahlt, ist nicht dabei."

Man könnte es durchaus Nötigung oder Erpressung nennen, doch es ist ganz gewöhnliche Marktwirtschaft in einer kommerziellen Publikation, egal wer die Zielgruppe ist.

.

Hier beginnt die Auflistung der angebotenen Hifi-Geräte

Hier im Jahr 1972 wurden noch die Receiver sowie die Tuner (aber ohne die Vorverstärker, Endstufen und Vollverstärker) in einen Topf geworfen. Später wurde auch das fein säuberlich getrennt. Die zugehörigen Preislisten (aufsteigend) sind bereits für alle 3 Kategorien enthalten.

Die gesamten technischen Daten sind automatisch gescannt !!

Es geht hier vordergründig um die Anzahl/Menge und Inflation der Geräte und Typen, die bis 1980 Jahr für Jahr deutlich gesteigert wurde - bis zum großen Knall.

.

"annual survey" - (zu bezahlende) jährliche Marktübersicht

.

Receiver

.

AR

.

  1. AR -FM stereo tuner-amplifier, sol id state, RMS power output 50 watts per channel at 8 ohms, harmonic distortion from 20-20,000 Hz less than 0.5 per cent, IM distortion less than 0.25 per cent at rated output. FET front end with 4-gang variable capacitor. ICs in IF stages. Sensitivity 2.0 uV or better, signal-to-noise ratio 65 dB, frequency response 20-15,000 Hz ± 1 dB, less than 0.5 per cent THD or IM distortion, capture ratio 2 dB or less, separation 35 dB at 50 Hz, 40 dB at 400 Hz. Defeatable inter-station muting. Null circuit for channel balance, idling power supply. Speaker switch. Center channel output. Front-panel headphone jack. Metal case.

.

Akai

.

  1. Akai AA-6300 -AM-FM stereo tuner-amplifier. Solid state. RMS power 20 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-40kHz +0, -3 dB (aux input), IHF power bandwidth 20-30kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). FM section has FET front-end. FM sensitivity 2.0 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.8 per cent harmonic distortion. Selectivity 50 dB, IHF capture ratio 2 dB. Defeatable interstation muting and loudness circuit. Front headphone jack. Remote speaker output. Phones/ ma in/both/remote speaker switch. Size 17l/2x5y4x13l/2. Wt. 22V2 lbs. 110-220 volts.
  2. Akai AA-6600 - AM-FM stereo tuner-amplifier. Solid state, 37.5 watts per channel RMS power output at 8 ohms with less than 0.8 per cent harmonic distortion. Frequency response 20-50,000 Hz ±3 dB, power bandwidth 20-30,000 Hz, hum and noise below rated output better than 65 dB at phono input. FET FM front end, IC in IF stages. IHF sensitivity 2 uV on FM, signal-to-noise ratio better than 60 dB, selectivity better than 50 dB, capture ratio 2 dB (IHF), stereo separation better than 35 dB. Defeat-able loudness control. Two tuning meters. Automatic stereo switching. Frontpanel

.

Altec

.

  1. Altec 704AX - AM-FM stereo tuner-amplifier. RMS power at all frequencies 1 2.5 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, both channels driven. Overall frequency response 20 to 20k Hz ±1 dB, power bandwidth 40 to 20k Hz, hum and noise -60 dB (phono input), IM distortion 0.5 per cent. FM tuner sensitivity 2.5 uV (IHF). Stereo separation 35 dB at 1 KHz with 0.5 per cent harmonic distortion, Capture ratio 3 dB. Defeatable interstation muting. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. Phones/main/ both/remote speaker switch. 110-220 volts.
  2. Altec 710AX - AM-FM stereo tuner-amplifier. RMS power at all frequencies 30 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, both channels driven. Overall frequency response 20 to 20k Hz ±1 dB, power bandwidth 30 to 20k Hz, hum and noise -60 dB (phono input), IM distortion 0.5 per cent. FM tuner sensitivity 2.5 uV (IHF). Stereo separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Capture ratio 2.5 dB. Tuning meter. Defeatable interstation muting and loudness. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. Phones/main/both/remote speaker switch. 11 0-220 volts.
  3. Altec Lansing 714A - AM-FM stereo tuner-amplifier. Solid state. RMS power 44 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion at all frequencies 30-20kHz. Overall frequency response 15-45kHz ±1 dB (aux input), IHF power bandwidth 15-25 kHz. Hum and noise -60 dB (phono input), -75 dB (aux input). IM distortion 0.5 per cent. FM section has FET front-end and crystal filters in IF. FM sensitivity 1.9 uV (IHF). Stereo separation 40 dB at 1kHz with 0.5 per cent harmonic distortion. IHF capture ratio 2.0 dB. Defeatable interstation muting and loudness circuit. Gain reduction switch. Illuminated function indicators. Remote speaker output. High frequency filter. Front panel headphone jack. Phones/main/both/ remote speaker switches. Size 165/gx53/8x1 33/s 110-220 volts.
  4. Altec Lansing 725A - AM-FM stereo tuner-amplifier. Solid state. RMS power 60 watts per channel into 8 ohms (both channels driven) with 0.3 per cent harmonic distortion at any frequency 30-20kHz. Overall frequency response 20-20kHz ±0.5 dB (aux input), IHF power bandwidth 15-25kHz. Hum and noise -60 dB (phono input), -80 dB (aux input). IM distortion 0.3 per cent. FM section has FET front-end and Butter-worth filters in IF. FM sensitivity 1.8 uV (IHF), stereo separation 40 dB at 1 kHz with 0.3 per cent harmonic distortion. IHF capture ratio 1.3 dB. Defeatable interstation muting and loudness circuit. Gain reduction switch. Remote speaker output. High and lowfrequency filters. Illuminated function indicators. Front panel headphone and tape recorder jacks. Phones/main/both/remote speaker switches. Size 173/4x5x16V2. 110-220 volts.

.

Bang & Olufsen

.

  1. B & O Beomaster 901 - AM-FM stereo tuner amplifier. RMS power output 1 9 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-20k Hz ±1.5 dB, power bandwidth 10-35k Hz, hum and noise -50 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.5 uV (IHF), S/N ratio 65 dB. Selectivity 55 dB. Stereo separation 30 dB at 1kHz with 0.6 per cent harmonic distortion. AM section tunes standard AM broadcast band and LW band. Stereo indicator and illuminated tuning aid. Defeatable AFC. Slide-rule type tuning and level controls. Size 3x20x9 in. Wt. 12 lbs. 110-220 volts.
  2. B & O Beomaster 1 200 - AM-FM stereo tuner-amplifier. Solid state. RMS power 15 watts per channel into 4 ohms with 1.0 per cent harmonic distortion. Overall frequency response 20-40kHz ±1.5 dB (aux input), IHF power bandwidth 25-35kHz. Hum and noise -65 dB (phono input). FM section has diode tuner with manual or pushbutton tuning. FM sensitivity 2 uV (26 dB quieting). Stereo separation 30 dB at 1 kHz with 0.5 per cent harmonic distortion. IHF selectivity 40 dB. AM section tunes standard broadcast band plus 147-350kHz. Slide rule-type tuning dial. Defeatable AFC. Illuminated function indicators. Headphone jack. Size 211/4x3x8. Wt. 1 3 lbs. 110-220 volts.
  3. B & O Beomaster 1600 M - AM-FM stereo tuner-amplifier. Solid state. RMS power 15 watts per channel into 4 ohms with 1.0 per cent harmonic distortion. Overall frequency response 30-25kHz±1.5 dB (aux input). Hum and noise -50 dB (Phono input). FM section has diode tuner with pushbutton or manual tuning. FM sensitivity 1.8 uV for 26 dB quieting. Stereo separation 30 dB at 1 kHz. AM section tunes LW, MW, and 1.6-20 MHz. Defeatable AFC. Remote speaker output. Main/remote speaker switch. Size 161/8x43/8x 9%. Wt. 13 lbs. 110-220 volts.
  4. B & O Beomaster 3000-2 - FM stereo tuner-amplifier. Solid state, 40 watts per channel RMS power, distortion less than 0.6 per cent at all frequencies between 40 and 12,500 Hz and power output levels up to 40 watts with both channels operating Frequency response 40-20,000 Hz ±1.5 dB. Signal-to-noise ratio 60 dB at 50 mW at nominal input signal (all inputs). FET FM front end, ceramic filters and ICs. FM sensitivity 2 uV (IHF), signal-to-noise ratio 70 dB, stereo separation 40 dB, selectivity 55 dB, capture ratio 3 dB (IHF). Main/remote/both speaker switches. Electronic tuning dials for presetting 6 FM stations. Slide-rule controls. Defeatable loudness compensation and AFC. DIN and U.S.-type sockets. Stereo headphone jack. Remote speaker input socket for TV sound or an additional stereo program. Wooden case. 110-220 volts.
  5. B & O Beomaster4000 - FM-stereotuner and amplifier. RMS power output 40 watts per channel into 8 ohms with 0.1 per cent harmonic distortion. Overall frequency response 20-30k Hz ± 1.5 dB, power bandwidth 10-35 kHz, hum and noise -62 dB (phono input). IM distortion 0.3 per cent. Diode tuner with six settable pushbuttons. Sensitivity 2.0 uV (IHF). Stereo separation 35 dB at 1 kHz with 0.4 per cent harmonic distortion. Selectivity 55 dB (IHF). Illuminated tuning aid and tuning meter. Defeatable AFC and loudness circuits. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. High and low frequency filters. Special connection for two extra stereo speakers to increase ambiance. Phones/remote/main/both speaker switches. Size 3'/2x221/2x101/2 in. Wt. 22 lbs. 110-220 volts.

.

Dual

.

  1. Dual CR 50 ~ AM/FM stereo tuner-amplifier. RMS power output 18 watts per channel into 4 ohms with 0.5 per cent harmonic distortion. Overall frequency response 1 5-40k Hz ±1.5 dB, power bandwidth 20-40k Hz, hum and noise -50 dB (phono input), Diode FM tuner with five settable pushbuttons, stereo indicator and meter tuning aid. Sensitivity 2.0 uV (IHF). Selectivity 60 dB. Defeatable interstation muting and AFC. AM section tunes standard broadcast band, LW and shortwave from 5.6 to 1 5.4 MHz. Front-panel headphone jack. DIN-type connectors. Size 161/2x41/4x13/4 in. Wt. 17 lbs. 110-220 volts.

.

Electro-Voice

.

  1. Electro-Voice EVR-1 - AM/FM stereo tuner-amplifier. RMS power output 17 watts per channel into 8 ohms with 0.2 per cent harmonic distortion. Overall frequency response 10-50k Hz, power bandwidth 1 5-20k Hz, hum and noise -60 dB (phono input), IM distortion 0.2 per cent. FM tuner sensitivity 2.3 uV (IHF), S/N ratio 55 dB. Stero separation 30 dB at 1kHz with 0.3 per cent harmonic distortion. Capture ratio 2.5 dB. Tuning meter. Defeatable loudness circuit. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. With walnut-finish wood case. Size 5^x18x11 in. 110-220 volts. Available soon.
  2. Electro-Voice EVR-2 - AM/FM stereo tuner-amplifier. RMS power output 27 watts per channel into 8 ohms with 0.2 per cent harmonic distortion. Overall frequency response 10-50k Hz ±1 dB, power bandwidth 15-20k Hz, hum and noise -60 dB (phono input), IM distortion 0.2 per cent. FM tuner sensitivity 2.0 uV (IHF), S/N ratio 55 dB. Stereo separation 30 dB at 1 kHz with 0.3 per cent harmonic distortion. Capture ratio 2.5 dB. Tuning meter and defeatable interstation muting circuit. Tape monitor circuit, loudness circuit and remote speaker output. Front-panel tape and headphone jacks. With walnut-finish wood case. Main/remote/both/phones switches. Size 5!4x18x11 in. 110-220 volts. Available soon.
  3. Electro-Voice EVR-3 - AM/FM stereo tuner-amplifier. RMS power output 45 watts per channel into 8 ohms with 0.2 per cent harmonic distortion. Overall frequency response 10-50k Hz ±1 dB, power bandwidth 10-20k Hz, hum and noise -60 dB (phono input), IM distortion 0.2 per cent. FM tuner sensitivity 1.9 uV (IHF), S/N ratio 55 dB. Stereo separation 35 dB at 1 kHz with 0.3 per cent harmonic distortion. Capture ratio 2.5 dB. Tuning meter. Defeatable circuits for interstation muting, loudness and hi-blend. High frequency filter. Tape monitor circuit. Remote Speaker output. Front-panel tape and headphone jacks. Main/remote/both/phones switches. With walnut-finish wood case. Size 5/2x18x11 in. 110-220 volts. Available soon.
  4. Electro-Voice EVR 4X4 - AM-FM stereo/ 4-channel tuner amplifier with built-in matrix decoder and four amplifier channels. RMS output power 10 watts per channel into 8 ohms with 1.0 per cent harmonic distortion, all channels driven. Frequency response 20-20k Hz ±1 dB, power bandwidth 20-20k Hz, hum and noise -54 dB (phono input). FM tuner sensitivity 2.5 uV (IHF), S/N ratio 65 dB. Stereo separation 30 dB at 1kHz with 0.5 per cent harmonic distortion. Capture ratio 3 dB. meter. Tape monitor and defeatable loudness circuits. Output for 4-channel remote speakers. Matrix decoder is Electro-Voice universal type. Tone and balance controls for all channels. 4-channel discrete inputs and outputs. Front-panel 4-channel headphone jacks. Remote/main speaker switch. Size 4%x1 6%x 11 Vi in. Available soon.

.

Fisher

.

  1. Fisher 201 - AM/FM stereo tuner-amplifier. RMS power output 20 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 25-20k Hz ±2 dB, power bandwidth 25-20k Hz, hum and noise -60 dB (phono input), IM distortion 0.3 per cent. FM tuner sensitivity 3.0 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1kHz with 0.5 per cent harmonic distortion. Selectivity 36 dB, capture ratio 3.0 dB. Tuning meter. Defeatable loudness circuit. Speaker muting mode. Tape monitor circuit. Front-panel headphone jack. Remote speaker output. Main/remote/both/phones speaker switch. Size 15/2x4/2x14/4 in. Wt. 18 lbs.
  2. Fisher 202 - AM-FM stereo tuner-amplifier. Solid state. RMS power into 8 ohms, 28 watts per channel with 0.5 per cent harmonic distortion. Overall frequency response 30-15kHz ±2 dB (Phono input), 25-20kHz ±2 dB (aux input), IHF power bandwidth 25-20kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). IM distortion 0.8 per cent. FM tuner has FET front end with 2.5 uV sensitivity. Stereo separation 35 dB at 1kHz. Alternate channel selectivity 42 dB, IHF capture ratio 3 dB. Harmonic distortion 0.6 per cent. S/N ratio 64 dB. Defeatable interstation muting and loudness circuit. Headphone jack. Phones/ main/both/ remote speaker switch. Size 16x43/8x14'/4. Weight 18'/2 lbs. 120-220 volts.
  3. Fisher 250-TX - AM-FM stereo tuner-amplifier. Solid state. RMS power into 8 ohms, 35 watts per channel with 0.5 per cent harmonic distortion. Overall frequency response 30-15kHz ±2 dB (phono input), 20-20kHz ±2 dB (aux input), IHF power bandwidth 20-25kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). IM distortion 1.0 percent. FM section has diode tuner with pushbutton tuning and manual tuning. FM sensitivity 2.0 uV, stereo separation 38 dB at 1 kHz. Alternate channel selectivity 45 dB, IHF capture ratio 2.8 dB. S/N ratio 65 dB. Harmonic distortion 0.5 per cent. Defeatable interstation muting, AFC, and loudness circuit. Headphone jack. Phones/main/both/remote speaker switches. Size 1 5V2x45/8x1 2% Weight 20 lbs. 1 20-220 volts.
  4. Fisher 301 - AM-FM stereo tuner-amplifier. Solid state. RMS power 42 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-20kHz±1.5 dB (aux input), IHF power bandwidth 25-20kHz. Hum and noise -60 dB (phono input). IM distortion 0.8 per cent. FET FM front-end. FM sensitivity 2.0 uV (IHF), S/N ratio 65 dB. Stereo separation 30 dB at 1 kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 2.8 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Illuminated function indicators. Remote speaker output. Frontpanel headphone jack. Output for 4-channel decoder. 4-channel control circuit. Phones/main/both/remote speaker switch. Size 18'/2 x5'/2 x16. Wt. 30 lbs.
  5. Fisher 401 - AM-FM stereo tuner-amplifier. Solid state. Same as Fisher 301 except: Diode tuner with manual, automatic scan, and wireless remote control (optional) tuning.
  6. Fisher 505-T - AM-FM stereo tuner-amplifier. Solid state. RMS power into 8 ohms, 55 watts per channel with 0.5 per cent harmonic distortion. Overall frequency response 30-1 5kHz ±2 dB (phono input), 20-25kHz ±2 dB (aux input), IHF power bandwidth 10-30kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). IM distortion 0.8 per cent. FM section has diode tuner with automatic scan tuning, manual tuning, and cable-type remote control (included). FM sensitivity 2.0 uV (IHF), stereo separation 38 dB at 1kHz. S/N ratio 65 dB, harmonic distortion 0.5 per cent. Alternate channel selectivity 45 dB, IHF capture ratio 2.5 dB. Defeatable AFC, interstation muting, and loudness circuit. Phones/main/both/remote speaker switch. Headphone jack. Size 1 5l/2x4V8x14,/4. Weight 25 lbs. 120-220-240 volts.
  7. Fisher 601 - 4-channel/stereo AM-FM tuner-amplifier. Solid state. RMS power 36 watts per channel (four channels) into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-25kHz ±1.5 dB (aux input), IHF power bandwidth 25-22 kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). IM distortion 0.8 per cent. FM sensitivity 1.8 uV (IHF), S/N ratio 66 dB. Stereo separation 35 dB at 400 Hz with 0.4 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 2.0 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Remote speaker output for 4-channel. Jack for 4-channel FM decoder. Built-in 4-channel effect circuit for use with stereo material. Front panel headphone jack. Phones/main/ both/remote speaker switch. Size 17x5'/4X 16V2. Wt. 35 lbs.
  8. Fisher 800-T - AM-FM stereo tuner-amplifier. Solid state. RMS power into 8 ohms, 65 watts per channel with 0.5 per cent harmonic distortion. Overall frequency response 30-15kHz ±2 dB (phono input), 20-25kHz ±1.5 dB (aux input), IHF power bandwidth 8-35kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). IM distortion 0.8 per cent. FM section has diode tuner with pushbutton tuning, automatic scan tuning, manual tuning, and cable-type remote control (included). FM tuner has MOS-FET front end and crystal filter in IF. AM tuner uses ceramic resonator filter. FM sensitivity 1.7 uV (IHF), stereo separation 38 dB at 400 Hz. S/N ratio 65 dB. Harmonic distortion 0.4 per cent. Alternate channel selectivity 70 dB, IHF capture ratio 1.5 dB. Defeatable AFC, interstation muting and loudness circuit. Phones/ma in/both/remote/center speaker switch. High and low frequency filters. Size 17x5x14'/?. Weight 30 lbs. 120-220 volts.
  9. Fisher 801 - AM-FM 4-channel/stereo tuner-amplifier. Solid state. Four channel amplifier has circuit to create 4 channel effect from stereo material. RMS power into 4 ohms, 44 watts per channel with 0.5 per cent harmonic distortion. Overall frequency response 20-25kHz ±1.5 dB, IHF power bandwidth 20-25kHz. Hum and noise -60 dB (phono input), -65 dB (aux input). FM section is stereo with plug-in provision for future 4 channel. Diode tuner with automatic scan tuning, remote control tuning or manual tuning. Two multipole filters in IF. FM sensitivity 1.7 uV (IHF), stereo separation 36 dB at 400 Hz. S/N ratio 66 dB. Harmonic distortion 0.35 per cent max. Alternate channel selectivity 65 dB, capture ratio (IHF) 1.5 dB. Defeatable interstation muting, high frequency filter, AFC, and loudness circuits. AM section has ceramic rsonator filters. Slidetype volume controls for front and rear speakers. Phones/main/both/ remote speaker switch. Headphone jacks for front and rear channels. Front/rear/both tape monitor switch- Size 17x5x16/2. Weight 35 lbs. 1 20-220-240 volts.

.

Grundig

.

  1. Grundig RTV 501 - AM-FM stereo tuner-amplifier. RMS power output 4 watts per channel into 4 ohms. FM stereo tuner has tuning meter and stereo indicator. AM section tunes standard broadcast band, LW and SW (5.6-16.2 MHz). Din-type input and output jacks. Size 241/4x4%x8 in. 110-220 volts.
  2. Grundig RTV 701 -Same as Grundig RTV 501 except has RMS power output 7 watts per channel into 4 ohms and five settable push buttons for FM tuning.
  3. Grundig RTV 800 - AM-FM stereo tuner-amplifier. RMS power 12.5 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 40-16k Hz ±1.5 dB, power bandwidth 30-30k Hz, hum and noise -60 dB (phono input), IM distortion 0.5 per cent. FM sensitivity 2.5 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1 kHz with 0.7 per cent harmonic distortion. Tuiaing meter and stereo indicator. Settable pL>sh buttons for FM tuning. AM section tunes LW, standard broadcast band and SW (5-16 MHz). Defeatable AFC, front-panel headphone jack (DIN). Size 23x5x 11 K in. 1 10-220 volts.
  4. Grundig RTV 900a - AM-FM stereo tuner-amplifier. RMS power output 25 watts per channel into 4 ohms with 0.5 per cent harmonic distortion. Frequency response 40-16k Hz ±1.5 dB, power bandwidth 20-30k Hz, hum and noise -60 dB (phono input), IM distortion 0.5 per cent. FM sensitivity 2.0 uV (IHF). Stereo separation 35 dB at 1kHz with 0.7 per cent harmonic distortion. S/N ratio 56 dB, capture ratio 1.8 dB. Tuning meter and stereo indicator. Seven settable pushbuttons for FM tuning. Defeatable AFC. AM section tunes standard broadcast band, LW and SW (5.4-16.2 MHz). Output for two additional stereo speakers for four-speaker setup. DINinput and output jacks. Front-panel headphone jack. Size 23/4x5/4x11 % in. 110-220 volts.

.

Harman-Kardon

.

  1. Harman-Kardon 230A - FM stereo tuner-amplifier. RMS power output 1 7 watts per channel into 8 ohms with 1.0 per cent harmonic distortion, both channels driven. Frequency response 1 5-70k Hz ± 1.5 dB, hum and noise -55 dB (phono input), IM distortion 0.5 per cent. FM tuner sensitivity 2.7 uV (IHF). Stereo separation 30 dB at 1 kHz with 0.6 per cent harmonic distortion. Tuning meter. Tape monitor circuit and defeatable loudness circuit. Remote speaker output. Front-panel headphone jack. Main/remote speaker switch. Size 143/4x71/2x4 in. Wt. 14 lbs.
  2. Harman-Kardon 330A - AM-FM stereo tuner amplifier. Solid state. RMS power 22Vi watts per channel into 8 ohms with 0.1 5 per cent harmonic distortion. Overall frequency response 7-50kHz ± 1 dB (aux input). IM distortion 0.7 per cent. FM sensitivity 1.9 uV (IHF). Stereo separation 32 dB at 1kHz. Defeatable loudness circuit. Front panel headphone jack. Remote speaker output. Exterior preamp power amp junction. Illuminated function indicators. Phones/main/ both/remote speaker switches. Size 153/sx 4!/2x13. Wt. 20 lbs. 110-220 volts.
  3. Harman-Kardon 630 - AM-FM stereo tuner-amplifier. Solid state. RMS power 30 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion at any frequency 20-20kHz. Overall frequency response 4-70kHz±0.5 dB (aux input), IHF power bandwidth 10-40kHz. Hum and noise -85 dB (aux input). IM distortion 0.15 per cent. FM sensitivity 1.9 uV (IHF), S/N ratio 68 dB. Stereo separation 32 dB at 1 kHz with 0.7 percent harmonic distortion.
  4. IHF capture ratio 2.5 dB. Independent power supplies for each channel. Defeatable inter-station muting and loudness circuit. High frequency filter. Illuminated function indicators. Connections for Dolby B (FM) processor. Exterior preamp-power amp junction. Remote speaker outputs. Front panel headphone jack. Phones/main/both/remote speaker switches. Size 1 2x43/4x1 33/4. Wt. 28 lbs. 110-220 volts.
  5. Harman-Kardon 930 - AM-FM stereo tuner-amplifier. Solid state. RMS power 45 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion at any frequency 20-20kHz. Overall frequency response 4-70kHz ± 0.5 dB (aux input), IHF power bandwidth 10-40kHz. Hum and noise -65 dB (phono input), -80 dB (aux input). IM distortion 0.15 per cent. FM section has FET front-end. FM sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 38 dB at 1kHz, 30 dB at 10kHz, with 0.6 per cent harmonic distortion. Alternate channel selectivity 50 dB, IHF capture ratio 2 dB. Defeatable interstation muting and loudness circuit. Independent power supplies for each channel. Remote speaker outputs. Front panel headphone jack. Illuminated function indicators. High and low frequency filters. FM noise cancel switch. Phones/main/ both/remote speaker switches. Size 17x43/4x 133/4. Wt. 29 lbs. 1 10-220 volts.

.

Heathkit

.

  1. Heathkit AR-19 - AM-FM stereo tuner-amplifier. RMS power output 20 watts per channel into 8 oms with 0.25 per cent harmonic distortion. Frequency response 6-35k Hz -1 dB, power bandwidth 5-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.25per cent. FM tuner sensitivity 2.0 uV (IHF). Stereo separation 35 dB at 1 kHz with 1.5 per cent harmonic distortion. Capture ratio 2.5 dB. Tuning meters and
  2. stereo indicator. Defeatable circuits for interstation muting, loudness and hi-blend. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. Main/both/ remote/phones switches. Size 51/8x16%x14/2 in. Wt. 30 lbs. 110-220 volts. In kit form.
  3. Heathkit AR-29 - AM-FM stereo tuner amplifier. RMS power output 35 watts per channel into 8 ohms with 0.25 per cent harmonic distortion. Frequency response 7-60k Hz -1 dB, power bandwidth 5-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.2 per cent. FM sensitivity 1.8 uV (IHF), S/N ratio 60 dB. Stereo separation 45 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Tuning meters and stereo indicator. Defeatable circuits for interstation muting, loudness and hi-blend. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. Main/both/remote/phones speaker switches. Size 51/8x16%x14/2 in. 110-220 volts. In kit form.
  4. Heathkit AR 1 500 - AM-FM stereo tuner-amplifier. RMS power output 60 watts per channel into 8 ohms with 0.25 per cent harmonic distortion. Frequency response 7-80k Hz -1 dB, power bandwidth 8-30k Hz, hum and noise -63 dB (phono input), IM distortion 0.1 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 60 dB. Stero separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 90 dB, capture ratio 1.5 dB. Tuning meters and stereo indicator. Defeatable circuits for loudness, hi-blend, FM interstation muting and tone-control bypass. Tape monitor circuit. Remote speaker output. Front-panel headphone jack. Main/remote/ both/phones speaker switches. Size 181/2x5x 14 in. Wt. 53 lbs. 110-220 volts. In kit form.


Hitachi

.

  1. Hitachi SR-300 - AM-FM stereo tuner-amplifier. Solid state. RMS power 15 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-50kHz (aux input), IHF power bandwidth 30-20kHz. Hum and noise -66 dB (phono input), -75 dB (aux input). FM section has FET front-end. FM sensitivity 3.0 uV (IHF), S/N ratio 62 dB. Stereo separation 35 dB at 1kHz with 1.2 per cent harmonic distortion. Defeatable interstation muting and loudness circuit. High frequency filter. Output for remote speakers. Front panel headphone jack. Tuning meter. Size 1 5x4V4 x12V4. Wt. 12 lbs.

.

JVC-Nivico

.

  1. JVC-Nivico 5030U - AM-FM stereo tuner-amplifier. Solid state. RMS power 50 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-30kHz (aux input). IM distortion 0.8 per cent. FM section has FETfront-end. FM sensitivity 1.8 uV (IHF). Stereo separation 35 dB with 0.5 per cent harmonic distortion. Has built-in equalizer with five individual tone controls (60, 250, 1 k, 5k, 15kHz), attenuation range 12 dB in 2 dB steps. Defeatable interstation muting, AFC, and loudness circuit, High and low frequency filters. Remote speaker output. Headphone jack. Phones/ main/both/remote speaker switch. Size 19%x 57/8x13. Wt. 31 lbs. 110-220 volts.
  2. JVC-Nivico 5540U - AM-FM stereo tuner-amplifier. RMS power output 35 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 20-40k Hz, power bandwidth 15-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 1.7 uV (IHF). Stereo separation 35 dB at 1 kHz with 0.5 per cent harmonic distortion. Tuning meters. Defeatable circuits for FM interstation muting and loudness. High and low frequency filters, tape monitor circuit. Built-in five-zone frequency equalizer with control frequencies at 40, 250, 1 k, 5k and 15k Hz. Outputs for two sets of remote speakers with either/all selector switch. Front-panel headphone and recorder jacks. Size 6x19/2x14/2 in. Wt. 26 lbs. 110-220 volts.
  3. JVC-Nivico VR-5501L - AM-FM stereo tuner-amplifier. RMS power output 16 watts per channel into 8 ohms with 0.8 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz ±1.5 dB, power bandwidth 30-20k Hz, hum and noise -65 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.5 uV (IHF), S/N ratio 60 dB. Stereo separation 33 dB at 1 kHz, with 1.0 per cent harmonic distortion. Selectivity 45 dB, capture ratio 4 dB. Tuning meter and stereo indicator. Defeatable loudness circuit. AM section tunes standard broadcast band and LW. Tape monitor circuit. DIN socket. Remote speaker output with main/ remote/both/phones switch. Front-panel headphone jack. Size 51/2x1 7x12% in. in. Wt. 15 lbs. 110-220 volts.
  4. JVC-Nivico VR-5521 - AM-FM stereo tuner-amplifier. RMS power output 22 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, both channels driven. Power bandwidth 20-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 2.0 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1 kHz with 1.0 per cent harmonic distortion. Selectivity 65 dB, capture ratio 2.0 dB. Tuning meter and stereo indicator. Defeatable circuits for loudness and FM interstation muting. Tape monitor circuit. Built-in five-zone frequency equalizer with control frequencies at 40, 250, 1k, 5k and 15k Hz. Remote speaker output with main/remote/both/phones switch. Exterior preamp/power-amp junction. Front-panel headphone and recorder jacks. Size 6x18x14/2 in. Wt. 22 lbs. 110-220 volts.
  5. JVC-Nivico VR-5541 - AM-FM stereo tuner amplifier. RMS power output 34 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, both channels driven. Frequency response 10-60k Hz, power bandwidth 15-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 1.7 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz. Selectivity 70 dB. Tuning meter and stereo indicator. Defeatable circuits for loudness, FM interstation muting, high and low frequency filters. Exterior preamp/power-amp junction. Built-in five-zone frequenzy equalizer with control frequencies at 40, 250, 1 k, 5k and 15k Hz. Remote Outputs for two remote speaker systems with either/all selector switch. Front-panel recorder and headphone jacks. Tape monitor circuit. Size 6x10/4x14 in. Wt. 16 lbs. 110-220 volts.
  6. JVC-Nivico VR-5551 - Same as JVC-Nivico VR-5541 except has RMS power output of 50 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, both channels driven.

  7. JVC-Nivico 4MM-1000 - AM-FM stereo 4-channel tuner-amplifier with four amplifier channels. RMS power output 10 watts per channel into 8 ohms with 1.0 per cent harmonic distortion, all channels driven. Frequency response 35-25k Hz, power bandwidth 10-30k Hz, hum and noise -72 dB (phono input), FM tuner sensitivity 2.2 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1kHz with 0.4 per cent harmonic distortion. Tuning meter and jack for 4-channel broadcast decoder. Joy-stick 4-channel balance control. 4-channel matrix decoder and 4-channel simulator circuit. Microphone jack and mixer. Front-panel 4-channel headphone jack. Size 6x18/4x11% in. Wt. 27 lbs. 110-220 volts.
  8. JVC-Nivico 4VR-5414 - AM-FM stereo/ 4-channel tuner-amplifier with four amplifier channels. RMS power output 15 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, all channels driven. Frequency response 15-50k Hz, power bandwidth 20-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 2.0 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1 kHz with 1.0 per cent harmonic distortion. Selectivity 65 dB, capture ratio 2.0 dB. Tuning meter and stereo indicator. 4-channel broadcast decoder jack. Optional remote 4-channel joy-stick balance control available. Built-in 4-channel simulator circuit. Built-in five-zone frequency equalizer for front channels with control frequencies at 40, 250, 1k, 5k and 15k Hz. Defeatable circuits for FM interstation muting and loudness. Tape monitor circuit. Front-panel 4-channel headphone jacks. Size 6x19/2x14/2 in. Wt. 28 lbs. 110-220 volts.
  9. JVC Nivico 4VR-5445 - Same as JVC-Nivico 4VR-5414 except has RMS power output of 21 watts per channel into 8 ohms with 0.5 per cent harmonic distortion, all channels driven. Two built-in five-zone frequency equalizers for separate control of front and rear channels. Size 6x23x14 in. Wt. 33 lbs.

.

Kenwood

.

  1. Kenwood KR-2120 -AM-FM stereo tuner-amplifier. Solid state. RMS power 11 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. IHF power bandwidth 25-20kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). IM distortion 0.8 per cent. FM section has FET front-end with 2.3 uV (IHF) sensitivity. S/N ratio 60 dB. Stereo separation 30 dB at 1kHz with 0.7 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 4.0 dB. Headphone jack. Defeatable loudness circuit. Step-type tone controls. Main or remote speaker switch. Size 16%x5l4x12%. Weight 16 lbs. 110-220 volts.
  2. Kenwood KR 2200 - AM-FM stereo tuner-amplifier. RMS power output 8 watts per channel into 8 ohms at all frequencies with 0.8 per cent harmonic distortion, both channels driven. Frequency response 25-35k Hz ±2 dB, power bandwidth 30-20k Hz, hum and noise -60 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 2.5 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1 kHz with 1.0 per cent harmonic distortion. Selectivity 40 dB, capture ratio 4.0 dB. Tuning meter and stereo indicator. Defeatable loudness circuit. Remote speaker output. Microphone jack and mixer. Front-panel headphone jack. Main/both/remote/phones speaker selector switch. Size 17%x43/x15 in. Wt. 14 lbs. 110-220 volts.
  3. Kenwood KR-3130 - AM-FM stereo tuner-amplifier. Solid state. RMS power 19 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. IHF power bandwidth 20-20kHz. Hum and noise -60 dB (phono input), -75 dB (aux input). IM distortion 0.8 per cent. FM section has FET front-end with 2.0 uV (IHF) sensitivity. S/N ratio 60 dB. Stereo separation 30 dB at 1 kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 4.0 dB. Headphone and microphone jacks. Defeatable loudness circuit. Noise filter. Step-type tone controls. Center channel output. Phones/main/both/remote speaker switch. Size 16%x5%x123/s. Weight 25 lbs. 110-220 volts.
  4. Kenwood KR-4200 - AM-FM stereo tuner-amplifier. RMS power output 19 watts per channel into 8 ohms at all frequencies with 0.7 per cent harmonic distortion, both channels driven. Frequency response 22-35k Hz ±2 dB, power bandwidth 25-25k Hz, hum and noise -63 dB (phono input), IM distortion 0.7 per cent. FM tuner sensitivity 2.0 uV (IHF), S/N ratio 63 dB. Stereo separation 40 dB at 1kHz with 0.8 per cent harmonic distortion. Selectivity 50 dB, capture ratio 3.0 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, defeatable loudness circuit and remote speaker output. Front-panel headphone jack. Main/both/remote/phones speaker switch. Size 17x53/4x133/4 in. Wt. 21 lbs. 110-220 volts.
  5. Kenwood KR 5170 - AM-FM stereo tuner-amplifier with rhythm composer. Solid state. RMS power 30 watts into 8 ohms with 0.5 percent harmonic distortion. Overall frequency response 20-40kHz ± 1.5 dB (aux input), IHF power bandwidth 18-30kHz. IM distortion 0.5 per cent. FM tuner has IHF sensitivity of 2.0 uV with 60 dB S/N ratio. Stereo separation 30 dB at 1kHz, harmonic distortion 0.8 per cent. Alternate channel selectivity 45 dB, IHF capture ratio 4.0 dB. Rhythm composer has 12 different types of rhythm and variable tempo control. Foot control included for remote start/stop of composer. Defeatable loudness circuit. Phones/main/remote A/Remote B speaker switch. Microphone mixer control. Microphone included. Headphone jack. Size 1 8x5'/2x1 6'/4. Weight 24 lbs.
  6. Kenwood KR-5200 - AM-FM stereo tuner-amplifier. RMS power output 30 watts per channel into 8 ohms at all frequencies with 0.5 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz, power bandwidth 1 7-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.5 per cent. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 0.7 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2.0 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, defeatable loudness circuit two remote speaker outputs, high and low frequency filters. Front panel microphone, headphone and recorder jacks. Either/all/none speaker switch. Size 17x5x14 in. Wt. 28 lbs. 110-220 volts.
  7. Kenwood KR-6140A - AM-FM stereos-channel tuner-amplifier with four amplifier channels. RMS power output 30 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 1 5-40k Hz, power bandwidth 20-30k Hz, hum and noise -65 dB (phono inputs), IM distortion 0.5 per cent. FM tuner sensitivity 1.9 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1 k Hz with 0.5 per cent harmonic distortion. Selectivity 45 dB, capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. High and low frequency filters. Defeatable loudness circuit, two 4-channel tape monitor circuits, microphone jack and mixer, built-in universal 4-channel matrix decoder and remote 4-channel speaker output. Remote balance/volume control available. Preamp output jacks. Front-panel 4-channel headphone jacks. Either/all/none speaker switches. Size 171/4x6%x141/2 in. Wt. 35 lbs. 110-220 volts.
  8. Kenwood KR-6160 - AM-FM stereo tuner-amplifier. Solid state. RMS power 70 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. IHF power bandwidth 12-30kHz. Hum and noise -65 dB (phono input), -75 dB (aux input). IM distortion 0.5 per cent. FM section has FET front-end and mechanical filter in IF. FM sensitivity 1.6 uV (IHF), S/N ratio 68 dB. Stereo separation 35 dB at 1kHz, with 0.5 per cent harmonic distortion. Alternate channel selectivity 55 dB, IHF capture ratio 1.5 dB. Defeat-able interstation muting and loudness circuit. High and low frequency filters. Microphone input jacks and level control. Microphone included. Center channel output. Headphone jack. Step-type tone controls. Output for two sets of remote speakers. Phones/main/both/remote speaker switch. Size 163/4x5'/2x1 23/8. Weight 34 lbs. 110-220 volts.
  9. Kenwood KR 6170 - AM-FM stereo tuner-amplifier with rhythm composer. Solid state. RMS power 33 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion. Overall frequency response 20-40kHz ±1.5 dB (aux input), IHF power bandwidth 17-30kHz. Hum and noise -65 dB (phono input), -75 dB (aux input). IM distortion 0.5 per cent. FM sensitivity 1.9 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1kHz with 0.8 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 4.0 dB. Defeatable interstation muting. Rhythm composer has 12 different types of rhythm, and variable tempo control. Selectable loudness /presence contours. Front panel jacks for guitar, microphone, tape recorder, headphones, and foot control for composer. Speaker muting switch. High and low frequency filters. Gain reduction switches. Outputs for four sets of remote speakers. Reverberation circuit. Output for external rear channel amp for 4-channel. Exterior preamp-power amp junction. Illuminated function indicators. Automatic shut-off timer. Any/all/none speaker switches. Size 21/4x 6V4x1 6'/4. Wt. 35 lbs. 110-220 lbs.
  10. Kenwood KR-6200 - AM-FM stereo tuner-amplifier. RMS power output 45 watts per channel into 8 ohms at all frequencies with 0.5 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz ±2 dB, power bandwidth 13-30k Hz, hum and noise -65 dB (phono input), IM distortion 0.5 per cent. FM tuner sensitivity 1.7 uV (IHF), S/N ratio 66 dB. Stereo separation 40 dB at 1 kHz with 0.6 per cent harmonic distortion. Selectivity 65 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, defeatable loudness circuit, midrange tone control, high and low frequency filters, two remote speaker outputs. Front-panel microphone, headphone and recorder jacks. Either/ all/none speaker switch. Size 17x5%x14 in. Wt. 29 lbs. 110-220 volts.
  11. Kenwood KR-7070A - AM-FM stereo tuner-amplifier. Solid state. RMS power 80 watts (65 watts 20-20kHz) into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 12-40kHz ±1.5 dB (aux input), IHF power bandwidth 10-30kHz. IM distortion 0.5 per cent. FM section has FET front-end and crystal filter in IF. FM tuner has automatic (motor) tuning, manual tuning, and remote control (included). FM sensitivity 1.5 uV (IHF), S/N ratio 70 dB Stereo separation 35 dB at 1kHz with 0.6 per cent harmonic distortion. Alternate channel selectivity 75 dB, IHF capture ratio 1.5 dB. AM tuner has mechanical filter in IF. Variable presence and loudness circuits. High and low frequency filters. Defeatable interstation muting. Front jacks for headphones and tape dubbing. Step-type tone controls. Phones/ma in/both/remote speaker switch for two sets of remote speakers. Speaker muting switch. Connections for two tape recorders. Size 17x6^x15. Weight 40 lbs. 110-220 volts.
  12. Kenwood KR-7200 - Same as Kenwood KR-6200 except has RMS power output of 55 watts per channel into 8 ohms at any frequency with 0.5 per cent harmonic distortion, both channels driven. Slide-type microphone mixer control.

.

Lafayette

.

  1. Lafayette LR-1500TA - AM-FM stereo tuner-amplifier. RMS power output 70 watts per channel into 4 ohms with 1.0 per cent harmonic distortion. Frequency response 20-20k Hz ±0.75 dB, power bandwidth 18-55k Hz, hum and noise -60 dB (phono input). FM sensitivity 1.5 uV (IHF), S/N ratio 75 dB. Stereo separation 40 dB at 400 Hz with 0.3 per cent harmonic distortion. Selectivity 50 dB, capture ratio 1.5 dB. Tuning meter and aid, stereo indicator and defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit, high and low frequency filters and remote speaker output. Front-panel headphone and recorder jacks. Main/remote/both/ phones speaker switch. Size 16%x41/4x14% in. Wt. 35 lbs. 110 volts.
  2. Lafayette LR-440 - AM-FM stereos-channel tuner-amplifier with four amplifier channels. RMS power output 20 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 20-20k Hz ±1.5 dB, power bandwidth 1 5-25k Hz, hum and noise -60 dB. FM tuner sensitivity 1.65 uV (IHF), S/N ratio 75 dB. Stereo separation 40 dB at 400 Hz with 0.3 per cent harmonic distortion. Capture ratio 1.5 dB. Illuminated tuning aid, stereo indicator and defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit, high frequency filter and built-in 4-channel simulator circuit. Front-panel 4-channel headphone and recorder jacks. Remote 4-channel speaker output. Size 1 8/2x133/4x43/4 in. Wt. 41 lbs. 110 volts.

.

Lux (später unter Luxman)

.

  1. Lux FQ900 - AM-FM stereo tuner-amplifier. Solid state. RMS power 50 watts per channel into 8 ohms (both channels driven) with 0.1 per cent harmonic distortion. Overall frequency response 10-40kHz (aux input), IHF power bandwidth 15-30kHz. Hum and noise -60 dB (phono input), -75 dB (aux input). IM distortion 0.2 per cent. FM section has crystal filters in IF. FM sensitivity 2.2 uV (IHF), S/N ratio 60 dB. Stereo separation 36 dB at 400 Hz with 0.5 per cent harmonic distortion. Alternate channel selectivity 50 dB, IHF capture ratio 1 dB. FM tuner has manual and pushbutton tuning. Switchable FM muting threshold. Defeatable loudness circuit. High and lowfrequencyfilters. Selectable frequencies for treble and bass tone controls. Front panel tape recorderand headphone jacks. Illuminated function indicators. Exterior preamp-power amp junction. Remote speaker output. Phones/main/both/remote speaker switches. Size 1 8'/2x6x1 7%.
  2. Lux FQ990 - AM-FM stereo tuner-amplifier. Solid state. RMS power 75 watts per channel into 8 ohms (both channels driven) with 0.1 percent harmonic distortion. Overall frequency response 10-40kHz, IHF power bandwidth 15-30kHz. Hum and noise -60 dB (phono input), -75 dB (aux input). IM distortion 0.2 per cent. FM section has FET front-end and crystal filters in IF. FM sensitivity 2.0 uV (IHF), S/N ratio 60 dB. Stereo separation 36 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 50 dB, IHF capture ratio 1 dB. FM tuner has manual and pushbutton tuning. Interstation muting threshold switch. Defeat-able loudness circuit. Selectable frequencies for bass and treble tone controls. High and low frequency filters. Tape head inputs to amplifier. Front panel tape recorder and headphone jacks. Illuminated function indicators. Remote speaker output. Phones/ main/both/remote speaker switches. Size 18'/>x6x133/4.

.

Marantz

.

  1. Marantz 2010 - AM-FM stereo tuner-amplifier. RMS power output 10 watts per channel into 8 ohms (40-16k Hz) with 1.0 per cent harmonic distortion, both channels driven. Frequency response 20 to 20k Hz ±1.5 dB, power bandwidth 20 to 22k Hz, IM distortion 1.0 per cent. FM tuner sensitivity 2.8 uV, S/N ratio 55 dB. Stereo separation 32 dB at 1kHz with 1.0 per cent harmonic distortion. Selectivity 48 dB, capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Defeatable loudness circuit, tape monitoring circuit and remote speaker output. Front-panel headphone jack. Main/remote/both/phones speaker switches. Size 14!4x4%x12 in.
  2. Marantz 2215 - AM-FM stereo tuner-amplifier. Solid state. RMS power 15 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion at any frequency 40-20kHz. Overall frequency response 20-40kHz ± 2 dB at 1 watt, IHF power bandwidth 15-40kHz. IM distortion 0.5 per cent. FM section has jack for 4-channel decoder. S/N ratio 50 dB with 5 uV signal, 60 dB at 50 uV. IHF capture ratio 3 dB. Stereo separation 40 dB at 1kHz, 25 dB at 10kHz, with 0.5 per cent harmonic distortion. Defeatable interstation muting and loudness circuit. Illuminated function indicator. High and low frequency filters. Front panel headphone jack. Exterior preamp-power amp junction. Phones/main/ remote speaker switches. Size 17x5x14. Wt. 30 lbs. 110-220 volts.
  3. Marantz 2230 - AM-FM stereo tuner amplifier. Solid state. RMS power 30 watts per channel into 8 ohms (both channels driven) with 0.5 percent harmonic distortion at any frequency 30 to 20kHz. Overall frequency response at 1 watt, 1 5-40kHz ± 2 dB, IHF power bandwidth 15-40kHz. IM distortion 0.5 per cent. FM section has jack for 4-channel decoder. FM tuner S/N ratio 51 dB with 5 uV signal, 63 dB at 50 uV.Stereo separation 40 dB at 1 kHz, 25 dB at 10 kHz with 0.4 per cent harmonic dis-tortion. IHF capture ratio 1.8 dB. Defeatable interstation muting and loudness circuit. High and low frequency filters. Step-type bass, mid, and treble tone controls. Front panel jacks for tape recorder and headphones. Exterior preamp-power amp junction. Illuminated function indicator. Remote speaker output. Phones/main/remote speaker switches. Size 17x5x14. Wt. 32 lbs. 110-220 volts.
  4. Marantz 2245 - AM-FM stereo tuner-amplifier. Solid state. RMS power 45 watts per channel into 8 ohms (both channels driven) with 0.3 per cent harmonic distortion at any frequency 20-^0kHz. Overall frequency response at 1 watt, 1 5-40kHz ± 1 dB. IHF power bandwidth 10-40kHz. IM distortion 0.3 per cent. FM tuner S/N ratio 52 dB with 5 uV signal, 65 dB at 50 uV. Stereo separation 40 dB at 1kHz, 25 dB at 10kHz with 0.4 per cent harmonic distortion. IHF capture ratio 1.8 dB. FM section has jack for 4-channel decoder. Illuminated function indicators. Step-type bass, mid, and treble tone controls. Defeatable interstation muting and loudness circuit. High and lowfrequency filters. Exterior preamp-power amp junction. Remote speaker output. Front panel jacks for tape recorder and headphones. Phones/ main/remote speaker switches. Size 17x5x 14. Wt. 32 lbs. 1 10-220 volts.
  5. Marantz 2270 - AM-FM stereo tuner-amplifier. Solid state. RMS power 70 watts per channel into 8 ohms (both channels driven) with 0.3 per cent harmonic distortion at any frequency 20-20kHz. Overall frequency response at 1 watt, 10-50kHz ± 1 dB. IHF power bandwidth 10-40kHz. IM distortion 0.3 per cent. FM tuner S/N ratio 53 dB with 5 uV signal, 67 dB at 50 uV. IHF capture ratio 1.9 dB. Stereo separation 40 dB at 1kHz, 26 dB at 10kHz, with 0.3 per cent harmonic distortion. FM section has jack for 4-channel decoder. Illuminated function indicators. Bass, mid, and treble tone controls. Antenna orientation aid. Defeatable inter station muting and loudness circuits. High and low frequency filters. FM stereo noise cancel circuit. Exterior preamp-power amp junction. Remote speaker output. Front panel jacks for tape recorder and headphones. Phones/main/remote speaker switches. Size 167hx5x14. Wt. 35 lbs. 1 10-220 volts.
  6. Marantz 4415 - AM-FM stereos-channel tuner-amplifier with four amplifier channels. RMS power output 15 watts per channel into 8 ohms (40-20k Hz) with 0.9 per cent harmonic distortion, all channels driven. Frequency response 20-80k Hz ±2 dB, power bandwidth 1 5-50k Hz, IM distortion 0.9 per cent. FM tuner sensitivity 2.8 uV (IHF), S/N ratio 55 dB. Stereo separation 32 dB at 1 kHz with 1.0 per cent harmonic distortion. Selectivity 48 dB, capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting circuit. 4-channel broadcast decoder jack. 4-channel tape monitor circuit, defeatable loudness circuit, high frequency filter, jack for optional 4-channel remote control unit, built-in 4-channel matrix decoder circuit 4-channel remote speaker output. Main/both/remote/phones speaker switches. Front-panel 4-channel headphone jacks. Size 17x5x14/4 in.
  7. Marantz 4430 - AM-FM stereos-channel tuner-amplifier with four amplifier channels. RMS power output 30 watts per channel into 8 ohms (20-20k Hz) with 0.3 per cent harmonic distortion, all channels driven. Frequency response 1 5-80k Hz ±2 dB, power bandwidth 10-50kHz, IM distortion 0.3 per cent. FM tuner sensitivity 1.7 uV, S/N ratio 65 dB. Stereo separation 42 dB at 1 kHz with 0.3 per cent harmonic distortion. Tuning meter, stereo indicator and defeatable interstation muting circuit. 4-channel broadcast decoder jack. Two 4-channel tape monitor circuits. defeatable loudness circuit, high frequency filter, jack for optional 4-channel remote control unit, built-in 4-channel matrix decoder circuit, jack for optional SQ decoder, 4-channel remotespeakeroutput. Main/both/remote/ phones speaker switches. Front-panel 4-channel headphones jacks. Size 17x5x14)4 in.
  8. Marantz 19 - FM tuner amplifier. Solid state. RMS power per channel 50 watts into 4 or 8 ohms. Overall frequency response (at 50 watts) 20-20kHz ± 0.5 dB with 0.15 per cent harmonic distortion. IHF power bandwidth 7-40kHz. Hum and noise -74 dB (phono input), -80 dB (aux input). IM distortion 0.2 per cent. FM section has oscilloscope tuning/antenna-orientation aid. FM sensitivity 1.5 uV with 30 dB quieting. S/N ratio 73 dB with 50 uV signal. IHF capture ratio 2.5 dB. Stereo separation 45 dB at 1kHz, 30 dB at 15kHz with 0.15 per cent harmonic distortion. Defeatable interstation muting and noise cancel. High and low frequency filters. Front panel tape recorder and headphone jacks. Remote speaker output. Phones/main/both/remote speaker switch. Size 181/4x5V4x16. Wt. 46 lbs

.

National Panasonic

.

  1. National Panasonic SA-5200 - AM-FM stereo tuner-amplifier with post-amplifier 4-channel decoder circuit. RMS power output 14 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 10-50k Hz +1, -3 dB, power bandwidth 7-30k Hz, hum and noise -70 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 1.9 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.4 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2.0 dB. Tuning meter and stereo indicator. Two tape monitor circuits, defeatable loudness circuit and remote speaker output. Built-in high-level matrix decoder divides amplified stereo signal to produce 4-channel sound in conjunction with four speakers. Front-panel stereo microphone and headphone jacks. Main/both/remote/phones speaker switch. Size 16x5/4x141/4 in. Wt. 18 lbs. 110-220 volts.
  2. National Panasonic SA 5800 - AM-FM stereo tuner-amplifier. Solid state. RMS power 27 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 1 5-65kHz -3 dB (aux input), IHF power bandwidth 5-40kHz. Hum and noise ~70dB (phono input). IM distortion 0.7 per cent. FM section has FET front-end. FM sensitivity 1.8 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1 kHz with 0.4 per cent harmonic distortion. Alternate channel selectivity 80 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Remote speaker output. Front panel headphone jack. Phones/ main/both/remote speaker switch. Size 1 6x 51/2x14. Wt. 24 lbs. 110-220 volts.
  3. National Panasonic SA-6200 - AM-FM stereo tuner-amplifier. RMS power output 38 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 15-65k Hz ±3 dB, power bandwidth 5-40k Hz, hum and noise -70 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 60 dB. Stereo separation 40 dB at 1 kHz with 0.4 per cent harmonic distortion. Selectivity 60 dB, capture ratio 1.5 dB. Tuning meter, stereo indicatorand defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit, high and low frequency filters and remote speaker output. Front-panel headphone jack. Main/remote/both/phones speaker switches. Size 1 7x5x1 5 in. Wt. 31 lbs. 1 10-220 volts.
  4. National Panasonic SA-6500 - AM-FM stereo tuner-amplifier. Solid state. RMS power 50 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 30-20kHz ± 1 dB (phono input), IHF power bandwidth 1 5-60kHz. Hum and noise -70 dB (phono input), -80 dB (aux input). IM distortion 1.0 per cent. FM section has FET front-end. FM sensitivity 1.8 uV, S/N ratio 60 dB. Stereo separation 40 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 50 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting, noise cancel, and loudness circuit. High and low frequency filters. Illuminated function indicators. Output for remote speaker. Front panel headphone jack. Phones/main/both/remote speaker switches. Size 16/8x57/hx15'/4. Wt. 34 lbs.
  5. National Panasonic SA-6400X - AM-FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 19 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 20-50k Hz -3 dB, power bandwidth 9-40k Hz, hum and noise -70 dB (phono input), IM distortion 0.7 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.4 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Jack for 4-channel broadcast decoder. Three 4-channel tape monitor circuits, defeatable loudness circuit, microphone jack and mixer, high and low frequency filters, built-in variable matrix decoder, adjustable phase-shift circuit to control degree of ambiance, 4-channel remote speaker output. Front-panel 4-channel headphone jacks. Main/both/remote/phones speaker switch. Size 17%x61/4x16 in. Wt. 33 lbs. 110-220 volts.
  6. National Panasonic SA-6800X - AM FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 42 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 20-50k Hz -3 dB, power bandwidth 7-40k Hz, hum and noise -73 dB (phono input), IMdistortion 0.7 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1 kHz with 0.4 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Tuning and signal strength meters, stereo indicator and defeatable interstation muting. Jack for 4-channel broadcast decoder. Three 4-channel tape monitor circuits, defeatable loudness circuit, microphone jack and mixer with 4-channel pan control, high and low frequency filters, built-in variable matrix decoder, adjustable phase-shift circuit to control degree of ambiance, 4-channel orientation control, 4-channel remote speaker output, front-panel 4-channel headphone jacks. Main/remote/both/phones speaker switch. Size 173/4x6/4x16 in. Wt. 35 lbs. 110-220 volts.

.

Onkyo

.

  1. Onkyo Y-3A - 4-channel/stereo AM-FM tuner-amplifier. Solid state. Has matrixcircuit to produce 4-channel effect. RMS power 12 watts per channel (four channels) into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 30-30kHz ±1 dB (aux input) at 1 watt. IHF power bandwidth 30-20kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). IM distortion 0.5 per cent. FM tuner has sensitivity of 3 uV (IHF), S/N ratio 50 dB. Stereo separation 35 dB at 400 Hz with 0.8 per cent harmonic distortion. Adjacent channel selectivity 35 dB, IHF capture ratio 4 dB. Defeatable loudness circuit. Meter-type tuning aid. Front headphone jack. Size 1 97/8x5V3x1 3V8. Wt. 24 lbs. 110-220 volts.
  2. Onkyo 234 - AM-FM stereo tuner-amplifier. Solid state. RMS power 11 watts per channel into 8 ohms with 0.3 per cent distortion. Overall frequency response at 1 watt, 20-25kHz I 1 dB (aux input), IHF power bandwidth 25-25kHz. Hum and noise -60 dB (phone input), -75 dB (aux input). IM distortion 0.1 per cent (at 10 watts). FM tuner has 2.5 uV (IHF) sensitivity, S/N ratio 60 dB. Stereo separation 33 dB at 400 Hz with 0.8 per cent harmonic distortion. Adjacent channel selectivity 60 dB, IHF capture ratio 2.5 dB. Defeatable loudness circuit Front headphone jack. Tuning meter. Main/ remote speaker switch. Size 17x5!/3x13%. Wt. 17V2 lbs. 110-220 volts.
  3. Onkyo 225 - AM-FM stereo tuner amplifier. Solid state. RMS power 22 watts per channel into 8 ohms with 0.3 per cent harmonic distortion. Overall frequency response at 1 watt, 15-30kHz ±1 dB (aux input), IHF power bandwidth 20-30kHz. Hum and noise -70 dB (phono input), -85 dB (aux input). IM distortion 0.1 per cent. FM tuner has 2.0 uV (IHF) sensitivity, S/N ratio 65 dB. Stereo separation 38 dB at 400 Hz, with 0.5 per cent harmonic distortion. Adjacent channel selectivity 65 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuits. High and low frequency filters. Tuning meter. Front headphone jack. Main/remote speaker switch. Size 17x51/3x1 33A. Wt. 22 lbs. 110-220 volts.

.

PE

.

  1. PE HSR 60 - AM-FM stereo tuner-amplifier. RMS power output 18 watts per channel into 8 ohms with 0.3 per cent harmonic distortion. Frequency response 15-40k Hz ±1.5 dB, power bandwidth 20-40k Hz, hum and noise -65 dB (phono input), FM tuner sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 45 dB at 1kHz with 1.0 per cent harmonic distortion. Selectivity 60 dB. Diode-type tuner with tuning meter, stereo indicator, defeatable AFC and five settable push buttons. AM section tunes standard broadcast band, LWand SW (5.6-6.6 MHz). DIN inputand output connectors, front-panel headphone jack. Size 161/2x41/4x13/2 in. Wt. 15 lbs. 110-220 volts.

.

Philips

.

  1. Philips RH 786 - AM-FM stereo tuner-amplifier. RMS power output 5.5 watts per channel into 8 ohms with 0.2 per cent harmonic distortion. Frequency response 45-20k Hz ±3 dB, power bandwidth 35-20k Hz, hum and noise -47 dB. FM tuner sensitivity 2.0 uV selectivity 48 dB, 1.5 per cent harmonic distortion. Tuning meter, stereo indicator and defeatable AFC. AM section tunes standard broadcast band and SW (3.2-1 7.9 MHz). DIN input and output jacks. Size 20x4x8/4 in. 110-220 volts.
  2. Philips RH 702 - AM-FM stereo tuner-amplifier. RMS power output 12 watts per channel into 4 ohms with 0.6 per cent harmonic distortion. Frequency response 20-20k Hz ±1 dB, power bandwidth 30-20k Hz, hum and noise -50 dB. FM tuner sensitivity 1.5 uV (IHF), selectivity 30 dB, 1.5 per cent harmonic distortion. Five settable push buttons for FM tuning. AM section tunes standard broadcast band, LW and SW (5.95-9.8 MHz). Tuning meter, stereo indicator and defeatable AFC. Din input and output jacks. Size 221/4x41/4x 81/2 in. 110-220 volts.
  3. Philips RH 790/43 - AM-FM stereo tuner-amplifier. RMS power output 20 watts per channel into 8 ohms with 0.15 per cent harmonic distortion. Frequency response 20-20k Hz ±0.5 dB, power bandwidth 5-50k Hz. FM sensitivity 2.5 uV (IHF), selectivity 30 dB, 1.0 per cent harmonic distortion. Tuning meter, stereo indicator and defeatable AFC. Three settable push buttons for FM tuning. AM section tunes standard broadcast band and SW (5.95-17.9 MHz)v Defeatable loudness circuit and scratch filter. DIN input and output jacks. Size 20x3%x10 in. 110-220 volts.

.

Pioneer

.

  1. Pioneer LX-440A - AM-FM stereo tuner-amplifier. RMS poweroutput12 watts per channel into 8 ohms with 1.0 per cent harmonic distortion, both channels driven. Frequency response 20-70k Hz ±3 dB, power bandwidth 30-20k Hz, hum and noise -75 dB (phono input). FM tuner sensitivity 2.5 uV (IHF), S/N ratio 50 dB. Stereo separation 35 dB at 1 kHz. Tuning meter and stereo indicator. AM section tunes standard broadcast band and LW. Tape monitor circuit, defeatable loudnesscircuit and remote speaker output. Either/phones speaker switches. Front-panel headphone jack. Size 16x53/4x1 5 in. Wt. 1 8 lbs. 110-220 volts.
  2. Pioneer LX-880 - AM-FM stereo tuner-amplifier with Long Wave band. RMS, power 28 watts at 8 ohms with less than 0.5 per cent harmonic distortion. Frequency response 30-80,000 Hz ±3 dB, power bandwidth 20-40,000 Hz, phono hum and noise better than -80 dB. FET FM front end with 4-gang variable capacitor, 4 ICs in IF. IHF usable sensitivity 2 uV, image rejection 70 dB, capture ratio 1 dB, signal-to-noise ratio 62 dB, stereo separation 35 dB. AFC. Defeatable AFC, interstation muting, loudness contour, AM bandwidth. Main/ remote/both speaker switch. Separate preamp and main amplifier jacks. DIN tape jack. Headphone jack. Multi-voltage. Rosewood side panels.
  3. Pioneer QX-4000 - AM-FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 10 watts per channel into 8 ohms with 1.0 per cent harmonic distortion, all channels driven. Frequency response 10-100k Hz ±3dB, power bandwidth 1 5-20k Hz (all channels driven), hum and noise -70 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.2 uV, S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 0.8 per cent harmonic distortion. Selectivity 40 dB, capture ratio 3 dB. Tuning meter, stereo indicator and defeatable interstation muting. 4-channel tape monitor circuit defeatable loudness circuit, two built-in 4-channel matrix decoder circuits (normal &SQ) and remote rear-channel speaker output. Size 173/4x53/4x133/4 in. Wt. 23 lbs. 110-220 volts.
  4. Pioneer QX-8000 - 4-channel/stereo AM-FM tuner-amplifier. Solid state. Four channel amplifier produces 20 watts per channel RMS power into 8 ohms with all channels driven. Harmonic distortion 1.0 per cent. Overall frequency response 10-40kHz ±3dB (aux input). Hum and noise -75 dB (phono input). IM distortion 0.4 per cent. FM section has FET front-end. FM sensitivity 2.2 uV (IHF), S/N ratio 60 dB. Stereo separation 38 dB at 1 kHz with 0.8 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 3 dB. Amplifier has circuit for producing 4-channel effect. Defeatable interstation mutingand loudnesscircuit. High and low frequency filters. On-off switches for front and rear speakers. Headphone jacks for front and rear channels. Size 20x6Y4x15V8. Wt. 34Va lbs. 110-220 volts.
  5. Pioneer SX-424 - AM-FM stereo tuner-amplifier. RMS power output 12 watts per channelinto8ohmswith LOpercentharmonic distortion both channels driven. Frequency response 20-70k Hz ±3 dB, power bandwidth 20-45k Hz, hum and noise -75 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.3 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1kHz with 0.8 per cent harmonic distortion. Capture ratio 3.5 dB. Tuning meter and stereo indicator. Tape monitor circuit, defeatable loudness circuit, microphone input and remote speaker output. Front-panel headphone jack. Main/remote/ both/phones speaker switch. Size 17x5%x 133/4 in. Wt. 1 7 lbs. 110-220 volts.
  6. Pioneer SX-525 - AM-FM stereo tuner-amplifier. RMS power output 17 watts per channel into8ohmswith 1 .Oper cent harmonic distortion, both channels driven. Frequency response 15-30k Hz±1 dB, power bandwidth 10-45k Hz, hum and noise -75 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.2 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at1 kHz with 0.8 per cent harmonic distortion. Selectivity 45 dB, capture ratio 3 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, defeatable loudness circuit, microphone jack and remote speaker output. Main/both/remote/phones speaker switch. Front-panel headphone jack. Size 17%x5%x 141/4 in. Wt. 18 lbs. 110-220 volts.
  7. Pioneer SX-626 - AM-FM stereo tuner-amplifier. RMS power output 20 watts per channel into 8 ohms at all frequencies with 1.0 per cent harmonic, both channels driven. Frequency response 15-20k Hz ±1 dB, power-amp power bandwidth 10-70k Hz, hum and noise -85 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 2.0 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 70 dB, capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, high and low frequency filters, defeatable loudness circuit, microphone jack and two remote speaker outputs. Front-panel headphone jack. Either/all/none speaker switch. Size 1 7%x 53/4x14% in. Wt. 22 lbs. 110-220 volts.
  8. Pioneer SX-727 - Similar to Pioneer SX-626 except has RMS power output of 37 watts per channel into 8 ohms at all frequencies with 0.5 per cent harmonic distortion, both channels driven. Speaker muting switch and signal-strength meter.
  9. Pioneer SX-828 - AM-FM stereo tuner-amplifier. RMS power output 54 watts per channel into 8 ohms at all frequencies with 0.5 per cent harmonic distortion, both channels driven. Frequency response 10-40k Hz±1 dB, power bandwidth 10-60k Hz, hum and noise -85 dB (phono input), distortion 0.5 per cent. FM tuner sensitivity 1.7 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB, with 0.4 cent harmonic distortion. Selectivity 75 dB, capture ratio 1.5 dB. Tuning and signal-strength meters, stereo indicator and defeatable interstation muting. Two tape monitor circuits, high and low frequency filters, defeatable loudness circuit, speaker, muting control and two remote speaker outputs. Front-panel stereo microphone and headphone jacks. Exterior preamp/power-amp junction. Either/all/phones speaker switch. Size 19x6x14% in. Wt. 33 lbs. 110-220 volts.
  10. Pioneer SX-1500TD - AM-FM stereo tuner-amplifier. Solid state, RMS power 58 watts per channel at 8 ohms with less than 0.5 per cent harmonic distortion at rated output. Frequency response 10-100,000 Hz ±3 dB, power bandwidth 15-40,000 Hz. Hum and noise at phono input better than -80 dB. FET FM front end with 4-gang variable capacitor, 4 ICs in IF stage, IC multiplex section. IHF usable sensitivity 1.7 uV, capture ratio 0.7 dB, signal-to-noise ratio 60 dB, channel separation 42 dB. Front-panel microphone jack with level control. Headphone jack. DIN tape jack. Separate preamp and power amplifier jacks. Defeat-able interstation muting, loudness contour, AFC. Main/remote/both speaker switch. Dual voltage. With unidirectional dynamic microphone, case and polished rosewood side panels.
  11. Pioneer SX-2500 - AM-FM stereo tuner-amplifier, solid state. RMS power 72 watts per channel at 8 ohms (both channels driven) with less than 0.5 per cent harmonic distortion. Frequency response 20-70,000 Hz 2 dB, power bandwidth 20-30,000 Hz, phono hum and noise better than -80 dB. Two-stage RF with 3-FET front end, 4-gang variable capacitor, 4 ICs and 2 crystal filters in IF. IHF usable sensitivity 1.6 uV, selectivity 65 dB, signal-to-noise ratio 70 dB, capture ratio 1 dB, stereo separation 40 dB, harmonic distortion (stereo) 0.5 per cent. Automatic tuning with servo-mechanism and remote control. Adjustable inter-station muting level. Defeatable loudness contour. Step-type tone controls. Stereo-only switch. Ma in/ remote/ both speaker switch. Two tape monitor circuits, tape-to-tape dubbing. Two tuning meters. Center channel output. Separate preamp and power amplifier jacks. DIN tape jack. Headphone jack. Dual voltage. Rosewood side panels.
  12. Pioneer SX-6000 -- AM-FM stereo tuner-amplifier. Solid state. RMS power 40 watts per channel into 8 ohms with both channels driven. Harmonic distortion 1.0 per cent. Overall frequency response 8-80kHz I 3 dB (aux input), IHF power bandwidth 10-80kHz. Hum and noise -80 dB (phono input), -90 dB (aux input). IM distortion 0.4 per cent. FM section has FET front-end. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 1.5 dB. Defe-atable interstation muting and loudness circuits. Speaker muting switch. High and low frequency filters. Front panel microphone and headphone jacks. Connections for preamp and power amp. Outputs for two sets of remote speakers and center channel. Phones/main/both/remote speaker switch. Size 17l/2x6]/2x12/4. Wt. 29 lbs. 110-220 volts.
  13. Pioneer SX-9000 - AM-FM stereo tuner-amplifier, solid state. RMS power 50 watts per channel at 8 ohms (both channels driven) with harmonic distortion less than 0.5 per cent. Frequency response 10-35,000 Hz 1 dB, power bandwidth 10-35,000 Hz, phono hum and noise better than -80 dB. FET FM front end with 4-gang variable capacitor, 4 ICs in IF, IC multiplex section. IHF usable sensitivity 1.6 uV, selectivity 40 dB, capture ratio 1 dB, signal-to-noise ratio 65 dB, stereo separation 40 dB, harmonic distortion (stereo) 0.8 per cent. Built-in reverb amplifier, microphone mixing, tape-to-tape dubbing. Drop-down front panel with two headphone jacks, two microphone inputs with level controls, tape jacks. Defeatable reverb control, interstation muting, loudness contour, tone color switch. Switches for 3 pairs of speakers. Two tuning meters. Switch for separate use of preamp and power amplifier. Multi-voltage. Walnut case.

.

SAE

.

  1. SAE Mark V - FM stereo tuner-amplifier. RMS power output 90 watts per channel at all frequencies into 8 ohms with 0.1 per cent harmonic distortion, both channels driven. Frequency response 10-100k Hz -2 dB, hum and noise -75 dB (phone input), IM distortion 0.1 per cent. FM tuner sensitivity 1.6 uV, S/N ratio 70 dB. Stereo separation 40 dB at 1kHz with 0.1 per cent harmonic distortion. Capture ratio 1.9 dB. Digital readout FM dial and built-in oscilloscope for performance measurements. Tape monitor circuit, six-frequency equalizer circuitry and remote speaker output. Front-panel headphone and recorder jacks. Size 17x5%x16>2 in.

.

Sansui

.

  1. Sansui 350A -AM-FM stereo tuner-amplifier. Solid state. RMS power 20 watts per channel into 8 ohms with 1.0 per cent distortion. Overall frequency response 30-30 kHz 1 dB (aux input), IHF power bandwidth 30-30kHz. Hum and noise -65 dB (phono input), -70 dB (aux input). IM distortion 1.0 per cent. FM section uses FET in RF stage. FM sensitivity 3.0 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 400 Hz, with 1.0 per cent harmonic distortion. Alternate channel selectivity 32 dB, IHF capture ratio 3 dB. Defeatable FM noise cancel and loudness circuit. Headphone jack. Main/both switch for remote speaker. Size 16V4x53/4x1 2. Weight 21 lbs. With cabinet. 110-220 volts.
  2. Sansui 800 - AM-FM stereo tuner-amplifier. Solid state. RMS power output 22 watts per channel at 8 ohms with less than 0.8 per cent harmonic distortion. Power bandwidth 20-40,000 Hz (IHF), frequencyresponse 20-30,000 Hz 1 dB. FET front end, three-gang tuning capacitor, four IF and three limiter stages. FM sensitivity 2 uV for 20 dB quieting, 2.8 uV IHF. Image rejection better than 45 dB, capture ratio 3 dB, signal-to-noise ratio better than 50 dB. FM stereo separation better than 35 dB. Defeatable loudness contour, interstation muting. DIN tapejack. Headphonejack. Blackout dial, illuminated function indicators. Dual voltage.
  3. Sansui 1000X -AM-FM stereo tuner-amplifier. Solid state. RMS power 28 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-30kHz 1 dB (aux input), IHF power bandwidth 20-30kHz. Humand noise-70 dB (phono input), -75 dB (aux input). IM distortion 0.8 per cent. FM section has FET front-end with 2.0 uV (IHF) sensitivity and 60 dB S/N ratio. Stereo separation 35 dB at 400 Hz. Harmonic distortion 0.8 per cent. Alternate channel selectivity 40 dB, IHF capture ratio 2.5 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Exterior preamp-power amp junction. Connections for two tape recorders. Headphone jack. Illuminated function indicators. Phones/main/remote/both speaker switch. Size 16'/2x53/4x12. Weight 23 lbs. With cabinet. 110-220 volts.
  4. Sansui 2000X - AM-FM stereo tuner-amplifier. Solid state. RMS power 39 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-40kHz (aux input), IHF power bandwidth 20-40kHz. Hum and noise -70 dB (phono input). IM distortion 0.8 per cent. FM section has FET front-end with 1.8 uV (IHF) sensitivity. S/N ratio 60 dB. Stereo separation 35 dB at 10kHz, harmonic distortion 0.8 per cent. Alternate channel selectivity 40 dB, IHF capture ratio 1 dB. Defeatable interstation muting, multiplex noise cancel, and loudness circuit. Illuminated function indicators. Headphone jack. Phones/main/both/remote speaker switch. Exterior preamp-power amp junction. High and low frequency filters. Size 18'/4x6x13'4. Weight 29 lbs. 110-220 volts.
  5. Sansui 3300 - AM-FM stereo tuner-amplifier. RMS power output 28 watts per channel into 8 ohms at any frequency with 0.4 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz +1, -2 dB, power bandwidth 15-35k Hz, hum and noise -70 dB (phone input), IM distortion 0.4 per cent. FM tuner sensitivity 1.9 uV (IHF), S/N ratio 63 dB. Stereo separation 35 dB at 1kHz with 0.8 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2 dB. Tuning meter, stereo indicator and defeatable interstation muting. Two tape monitor circuits, two phono inputs, defeatable loudness circuit, high and low frequency filters, microphone jack and mixer, jacks for 4-channel adapter and noise reduction unit, exterior preamp/ power-amp junction and two remote speaker outputs. Front-panel headphone and recorder jacks. Any/all/none speaker switches. Size 19/4x53/4x14 in. Wt. 37 lbs. 110-220 volts.
  6. Sansui 3500 - AM-FM stereo tuner-amplifier, solid state. RMS power 40 watts per channel at 8 ohms with less than 0.8 per cent THD at rated output, IHF power bandwidth 20-30,000 Hz, frequency response 30-40,000 Hz 1 dB, IHF hum and noise at phono input -70 dB. FET FM front end with 4-gang variable capacitor and 4 ICs in IF strip. IHF usable sensitivity (FM) 1.8 uV, less than 0.6 per cent THD, signal-to-noise ratio better than 60 dB, selectivity better than 40 dB at 98 MHz, stereo separation better than 35 dB at 400 Hz, IHF capture ratio 1.0 dB. All-silicon AM tuner. Defeatable loudness contour, interstation muting, noise canceler, rumble and scratch filters. Blackout dial, illuminated function indicators. Separate pre- and power-amplifier jacks. Printed circuit modular construction. Main/remote/ both speaker switch, headphone jack. DIN socket. Dual voltage.
  7. Sansui 4000 - AM-FM stereo tuner-amplifier. Solid state. RMS power 45 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-40kHz 1 dB (aux input). IMF power bandwidth 20-30kHz. Hum and noise -70 dB (phono input), -70 dB (aux input). IM distortion 0.8 per cent. FM section has FET in first RF stage. FM sensitivity 1.8 uV (IMF), S/N ratio 60 dB. Stereo separation 35 dB at 400 Hz, with 0.6 per cent harmonic distortion. Alternate channel selectivity 40 dB, IMF capture ratio 1.0 dB. Variable interstation muting. Defeatable FM noise cancel and loudness circuit. High and low frequency filters. Headphone jack. Illuminated function indicators. Output for two sets of remote speakers. Phones/main/both/remote speaker switch. Size 1 73/4x5'/4x1 3]A. Weight 31 lbs. 110-220 volts.
  8. Sansui 5000X - AM-FM stereo tuner-amplifier. Solid state. RMS power 60 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-30kHz 1 dB (aux input), IHF power bandwidth 1 5-30kHz. Hum and noise -70 dB (phono input). IM distortion 0.8 per cent. FM section uses MOSFET front-end. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz, harmonic distortion 0.8 per cent. Alternate channel selectivity 45 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuit. High and low frequency filters. Illuminated function indicators. Front jacks for headphones, microphone, and second tape recorder. Exterior preamp-power amp junction. Microphone volume control. Outputs for two sets of remote speakers. Phones/ma in/both/remote speaker switch. Size 18,/4x6l/2x13l/4. Weight 33 lbs. 110-220 volts.
  9. Sansui 5500 - AM-FM stereo tuner-amplifier. RMS power output 45 watts per channel into 8 ohms at any frequency with 0.4 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz ±1 dB, power bandwidth 15-35k Hz, hum and noise -70 dB (phono input), IM distortion 0.4 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1kHz with 0.8 per cent harmonic distortion. Selectivity 60 dB, capture ratio 1.5 dB. Tuning and signal-strength meters, stereo indicator and defeatable interstation muting. Three tape monitor circuits, two phono inputs, defeatable loudness circuit, high and low frequency filters, microphone jack with two channel mixer, jacks for 4-channel adapter and noise reduction unit, exterior preamp/power-amp junction and three remote speaker outputs. Front-panel headphone and recorder jacks. Any/all/none speaker switches. Size 20]Ax 53/4x14 in. Wt. 42 lbs. 110-220 volts.
  10. Sansui 7000 - AM-FM stereo tuner amplifier. Solid state. RMS power 70 watts per channel into 8 ohms with 0.4 per cent harmonic distortion. Overall frequency response 20-30kHz ±1 dB (aux input), IHF power bandwidth 20-30kHz. Hum and noise -70 dB (phono input). IM distortion 0.4 per cent. FM section has MOSFET front-end and ceramic filters in IF. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 60 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuit. High and low frequency filters. Exterior preamp-power amp junction. Speaker muting control. Half-power mode. Microphone mixer. Illuminated function indicators. Front panel jacks for microphone, headphones, and second tape recorder. Outputs for two sets of remote speakers. Phones/main/both/remote speaker switch. Size ITfo&foA 3. Weight 33 lbs. With cabinet. 1 10-220 volts.
  11. Sansui Six - AM-FM stereo tuner-amplifier. RMS power output 28 watts per channel into 8 ohms at all frequencies with 0.3 per cent harmonic distortion, both channels driven. Frequency response 20-40k Hz +1, -1.5 dB, power bandwidth 10-50k Hz, hum and noise -70 dB (phono input), IM distortion 0.3 per cent. FM tuner sensitivity 2 uV (IHF), S/N ratio 63 dB. Stereo separation 35 dB at 1kHz with 0.5 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2 dB. Tuning meter, stereo indicator and defeatable inter-station muting. Two tape monitor circuits. Two remote speaker outputs, exterior preamp/ power-amp junction, 4-channel adapter and noise reduction unit jacks, and defeatable loudness circuit. Front-panel headphone and recorder jacks. High and low frequency filters. Either/all/none speaker switch. Size 16%x 5/2x12/2 in. Wt. 30 lbs. 110-220 volts.
  12. Sansui Seven - AM-FM stereo tuner-amplifier. RMS power output 36 watts per channel into 8 ohms at all frequencies with 0.3 per cent harmonic distortion, both channels driven. Frequency response 1 5-40k Hz +1, -1.5 dB, power bandwidth 10-50k Hz, hum and noise -70 dB (phono input), IM distortion 0.3 per cent. FM tuner sensitivity 1.8 uV, S/N ratio 63 dB. Stereo separation 40 dB at 400 Hz with 0.5 per cent harmonic distortion. Selectivity 60 dB, capture ratio 1.5 dB. Signal-strength and tuning meters, stereo indicator and defeatable interstation muting. High and low frequency filters, defeatable loudness circuit, two tape monitor circuits, exterior preamp/power-amp junction, two remote speaker outputs, jacks for noise reduction unit and 4-channel adapter, and midrange tone control. Front-panel headphone and recorder jacks. Either/all/none speaker switch. Size 17/2x5/2x13 in. Wt. 32 lbs. 110-220 volts. Sansui Eight - AM-FM stereo tuner-amplifier. Solid state. RMS power 60 watts per channel into 8 ohms with 0.3 prcent harmonic distortion. Overall frequency response 10-40kHz 1.0 dB (aux input), IHF power bandwidth 10-40kHz. Hum and noise -70 dB (phono input). IM distortion 0.4 percent. FM section hasMOSFETfront-end and crystal filter in IF. FM sensitivity 1.7 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 400 Hz with 0.5 per cent harmonic distortion. Alternate channel selectivity 60 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuits. High and low frequency filters. Exterior preamp-power amp junction. Dubbing and headphone jacks. Output for two sets of remote speakers. Illuminated function indicators. Phones/ main/both/remote speaker switch. Size ^Vfo&foAZ. Weight 38 lbs. Cabinet included. 110-220 volts.
  13. Sansui QR-500 - AM-FM stereos-channel tuner amplifier with four amplifier channels. RMS power output 8 watts per channel into 8 ohms with 1.0 per cent harmonic distortion. Frequency response 30-30k Hz ±2 dB, power bandwidth 30-30k Hz, hum and noise -60 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 5 uV (IHF), S/N ratio 50 dB. Stereo separation 30 dB at 400 Hz with 1.0 per cent harmonic distortion. Selectivity 35 dB, capture ratio 3 dB. Tuning meter and stereo indicator. Tape monitor circuit, built-in 4-channel matrix decoder and circuit to provide simulated 4-channel. Front-panel headphone jack. Size 1 7'/2x5x12 in. Wt. 17 lbs. 11 0-220 volts.
  14. Sansui QR-1500 - AM-FM stereos-channel tuner-amplifier with four amplifier channels. RMS power output 15 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 30-30 kHz ±2 dB, power bandwidth 20-30k Hz, hum and noise -60 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 3 uV (IHF), S/N ratio 55 dB. Stereo separation 35 dB at 400 Hz with 1.0 per cent harmonic distortion. Selectivity 45 dB, capture ratio 3 dB. Tuning meter and stereo indicator. Defeatable loudness circuit, 2-channel tape monitor circuit, 4-channel orientation control, built-in 4-channel matrix decoder and 4-channel synthesizer. Front-panel 4-channel headphone jacks. Size 1 9x51/4x12/4 in. Wt. 20 lbs. 110-220 volts.
  15. Sansui QR-4500 - 4-channel/stereo AM-FM tuner-amplifier. Solid state. Four channel amplifier with 27 watts RMS power per channel into 8 ohms. Harmonic distortion 0.5 per cent. Overall frequency response 20-30 kHz (aux input), IHF power bandwidth 20-30 kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). IM distortion 0.5 per cent. Circuit for creating 4-channel effect. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.8 per cent harmonic distortion. IHF capture ratio 1.5 dB. Defeatable interstation muting and loudness circuits for front and rear. High and low frequency filters. Front panel jacks for front and rear headphones. FM section has built-in 4-channel matrix decoder. Illuminated mode indicator. Outputs for front center channel and remote speakers. Phones/ma in/both/remote speaker switch. 110-220 volts.
  16. Sansui QR-6500 - 4-channel/stereo AM-FM tuner-amplifier. Same as Sansui QR 4500 except 36 watts RMS power per channel into 8 ohms.

.

Sanyo

.

  1. Sanyo DCX2300K -- AM-FM stereo tuner-amplifier. Solid state. RMS power 30 watts per cheannel into 8 ohms with 1.0 per cent harmonic distortion. Overall frequency response 20-50kHz (aux input), IHF power bandwidth 20-50kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). IM distortion 0.8 per cent. FM section has FET front-end. FM sensitivity 2.1 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1kHz with 0.8 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 2.5 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Front panel microphone jack and mixer. Remote speaker output. Front panel headphone jack. 4-channel control circuit. Phones/main/both/remote speaker switch. Size 17'/4x5x123/4. Wt. 15 lbs.
  2. Sanyo DCX 3000 K - AM-FM stereo/4 channel tuner-amplifier with four amplifier channels. RMS power output 10 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 20-40k Hz, IHF power bandwidth 20-34k Hz, hum and noise -60 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 3 uV (IHF), capture ratio 2.5 dB. Tuning meter and stereo indicator. Defeatable loudness circuit, microphone input, built-in SQ and regular matrix decoders. Front-panel headphone jacks. Size 1 83/4x131/2x43/4 in. Wt. 1 7 lbs. 1 10-220 volts.
  3. Sanyo DCX 3300 K - AM-FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 20 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 20-40k Hz, power bandwidth 20-34k Hz, hum and noise -60 dB (phono input), IM distortion 1.0 per cent. FM sensitivity 3 uV (IHF), capture ratio 2.5 dB. Tuning meter and stereo indicator. Defeatable loudness circuit, four output level meters, microphone inputs, built-in SQ and regular 4-channel decoders. Front-panel 4-channel headphone jacks. Size 2034x141/2x 6/4 in. Wt. 26 lbs. 1 10-220 volts.

.

Scott

.

  1. Scott 342-C - FM stereo tuner-amplifier. Solid state, all-silicon output circuitry, RMS power 25 watts per channel at 8 ohms (both channels driven) with 0.5 per cent harmonic distortion. IM distortion 0.3 per cent at rated output. Frequency response 15-30,000 Hz J- 1 dB, IHF power bandwidth 15-25,000 Hz, hum and noise at phono input -55 dB. FET circuitry in tone control, IC preamplifier section. FET silver-planted FM front end, IC and quartz filter IF strip, IC multiplex section. IHF usable sensitivity 1.9 uV with 80 dB cross modulation rejection. Stereo separation better than 40 dB, capture ratio 2.5 dB, signal-to-noise ratio 65 dB. Signal strength meter, Perfectune indicator. Defeatable loudness compensation, interstation muting. Noise filter. Snap-in printed circuit modular construction, wire-wrap solderless connection. Main/ remote/both speaker switches. Front-panel headphone jack. Line cord antenna.
  2. Scott 3300 - AM-FM stereo tuner-amplifier. Solid state. RMS power 33 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 18-25kHz (aux input), IHF power bandwidth 20-30kHz. Hum and noise -60 dB (phono input), -70 dB (aux input). FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 400 Hz with 0.6 per cent harmonic distortion. IHF capture ratio 2.5 dB. Variable-threshold interstation muting circuit. Defeatable loudness circuit. High frequency filter. Remote speaker output. Front panel headphone jack. Phones/main/ both/remote speaker switches. Size 155/sx 5x113/4. 110-220 volts.
  3. Scott 636 S - AM-FM stereo tuner-amplifier. Solid state. RMS power 20 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion. IHF power bandwidth 20-20kHz. Hum and noise -60 dB (phono input), -75 dB (aux input). IM distortion 0.5 per cent. FM sec tion has FET front-end and crystal filter IF. FM sensitivity 1.9 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1kHz with 0.8 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 2.5 dB. Defeatable interstation muting and loudness circuit. Remote speaker output. Front panel headphone jack. Phones/main/ both/remote speaker switches. Size 17x4'/:x 9V3. 110-220 volts.
  4. Scott 637 S - AM-FM stereo tuner-amplifier. Solid state. Same as Scott 636 S except RMS power per channel is 30 watts.
  5. Scott 477 - AM-FM stereo tuner-amplifier. Solid state. RMS power 70 watts per channel into 8 ohms (both channels driven) with 0.5 per cent harmonic distortion. Overall frequency response 15-30kHz (aux input), IHF power bandwidth 1 5-40kHz. Hum and noise -65 dB (phono input), -75 dB (aux input). FM section has FET front-end. FM sensitivity 1.9 uV (IHF), S/N ratio 70 dB. Stereo separation 35 dB at 1 kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 2.5 dB. Defeatable interstation muting and loudness circuit. High frequency filter. Front panel microphone, tape recorder, and headphone jacks. Illuminated function indicators. Exterior preamp-power amp junction. Jack for 4-channel decoder. Outputs for two sets of remote speakers. Phones/main/both/remote speaker switch. Size WVzxexIS'/i.Wt. 30 lbs.

.

Sherwood

.

  1. Sherwood S7050 - AM-FM stereo tuner-amplifier. RMS power output 6 watts per channel (20-20k Hz) into 8 ohms with 1.0 per cent harmonic distortion, both channels driven. Frequency response 30-20k Hz ±1 dB, power bandwidth 15-50k Hz, hum and noise -65 dB (phono input), IM distortion 1.0 per cent. FM tuner sensitivity 3.5 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1 kHz with 0.6 per cent harmonic distortion. Selectivity 40 dB, capture ratio 4.0 dB. Tuning meter and stereo indicator. Tape monitor circuit and remote speaker output. Front-panel headphone jack. Main/remote speaker switch. Size 5/2x16x12 in. Wt. 24 lbs.
  2. Sherwood S7100A ~ AM-FM stereo tuner-amplifier. RMS power output 14 watts per channel into 8 ohms (20-20k Hz) with 0.9 per cent harmonic distortion, both channels driven. Frequency response 20-20k Hz ±1 dB, power bandwidth 1 5-50k Hz, hum and noise -65 dB (phono input), IM distortion 1.0 per cent. FM sensitivity 1.0 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 50 dB, capture ratio 2.8 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit and remote speaker output. Front-panel recorder and headphone jacks. Either/ all/none speaker switch. Size 5%x1 7!4x131/2 in. Wt. 30 lbs.
  3. Sherwood S7200 - AM-FM stereo tuner-amplifier. RMS power output 32 watts per channel (20-20k Hz) into 8 ohms with 0.7 per cent harmonic distortion, both channels driven Frequency response 20-20k Hz ±0.5 dB, power bandwidth 1 2-35k Hz, hum and noise -60 dB (phono input), IM distortion 0.7 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 66 dB. Stereo separation 40 dB at 1 kHz with 0.25 per cent harmonic distortion. Selectivity 60 dB, capture ratio 1.9 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, provision for 4-channel decoder, high-frequency filter, defeatable loudness circuit and remote speaker output. Front-panel recorder and headphone jacks. Either/all/none speaker switch. Size 5%x17/2x14 in. Wt. 32 lbs.
  4. Sherwood S-7900A - AM-FM stereos-channel tuner-amplifier with post-amplifier 4-channel matrix decoder. RMS power output 60 watts per channel (20-20k Hz) into 8 ohms with 0.3 per cent harmonic distortion, both channels driven. Frequency response 20-20k Hz ±1 dB, power bandwidth 7-60k Hz, hum and noise -65 dB (phono input), IM distortion 0.3 per cent. FM tuner sensitivity 1.7 uV (IHF), S/N ratio -70 dB. Stereo separation 40 dB at 1kHz with 0.15 per cent harmonic distortion (mono). Selectivity 65 dB, capture ratio 1.9 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, provision for additional 4-channel matrix decoder, high-frequency filter, defeatable loudness circuit, remote speaker output and built-in high-level Dynaquad 4-channel matrix decoder to produce 4-channel sound when coupled to four speakers. Front-panel headphone and recorder jacks. Size 16/4x5/4x14 in. Wt. 30 lbs.
  5. Sherwood S-8900A - Same as Sherwood S-7900A except has no AM tuner section.
  6. Sherwood SEL200 - FM stereo tuner-amplifier. Solid state. RMS power 60 watts per channel into 8 ohms with 0.2 per cent harmonic distortion. Overall frequency response 20-20k Hz ±1 dB (aux input). Hum and noise -65 dB (phono input). IM distortion 0.6 per cent. FET FM front-end and 12 section IF filter. FM sensitivity 1.5 uV, S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz with 0.1 5 per cent harmonic distortion. Alternate channel selectivity 70 dB, IHF capture ratio 1.7 dB. Defeatable interstation muting and loudness. High frequency filter. Output for remote stereo and mono speakers. Illuminated function indicators. Front panel tape recorder and headphone jacks. Phones/main/both/remote speaker switches. Size 18/2x51/4x14. Wt. 37 lbs.

.

Sony

.

  1. Sony STR 6046 - AM-FM stereo tuner-amplifier. RMS power output 22 watts per channel into 8 ohms with 0.8 per cent harmonic distortion, both channels driven. Frequency response 30-40k Hz -3 dB, hum and noise -60 dB (phono input), IM distortion 0.8 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 68 dB. Stereo separation 35 dB at 400 Hz with 0.8 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit, microphone inputs and remote speaker output. Front-panel headphone jack. Either/all/none speaker switch. Size 1 7x53/4x13/2 in. Wt. 20 lbs. 110-220 volts.
  2. Sony STR-6065 - AM-FM stereo tuner-amplifier. RMS power output 50 watts per channel (all frequencies) into 8 ohms with 0.2 per cent harmonic distortion, both channels operating. Frequency response 12-70k Hz -3 dB, power bandwidth 1 5-30k Hz, IM distortion 0.2 per cent. FM tuner sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 38 dB at 400 Hz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, high frequency filter, defeatable loudness circuit and remote speaker output. Front-panel headphone and aux. input jacks. Either/all/none speaker switch. Size 17/4x5%x14 in. Wt. 30 lbs. 110-220 volts.
  3. Sony STR-6200F - FM stereo tuner-amplifier. Solid state. RMS power 60 watts per channel into 8 ohms (both channels driven) 20-20kHz with 0.2 per cent harmonic distortion. Overall frequency response 10-100kHz -3 dB (aux input), IHF power bandwidth 10-40kHz. Hum and noise -70dB (phono input). IM distortion 0.2 per cent. FET FM front-end. FM sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 400 Hz with 0.35 per cent harmonic distortion. Alternate channel selectivity 100 dB, IHF capture ratio 1.0 dB. Defeatable interstation muting, multiplex blend, and loudness circuit. High arid low frequency filters. Outputs for remote speakers and center channel. Front panel jacks for headphones and tape recorder. Phones/main/ both/remote speaker switch. Size 19x5%x16. Wt. 40 lbs. 110-220 volts.

.

Superscope

.

  1. Superscope R-230 - AM-FM stereo tuner-amplifier. RMS power output 5 watts per channel into 8 ohms with 1.0 per cent harmonic distortion. Frequency response 30-20k Hz, power bandwidth 30-50k Hz, hum and noise -70 (aux input). FM tuner sensitivity 5 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1 kHz with 1.5 per cent harmonic distortion. Capture ratio 6 dB. Tuning meter and stereo indicator. Front-panel headphone jack. Size 163/4x4/2x103/4 in. Wt. 10 lbs.
  2. Superscope R-250 - AM-FM stereo tuner-amplifier. RMS power output 10 watts per channel into 8 ohms with 1.0 per cent harmonic distortion. Frequency response 10-63k Hz, power bandwidth 15-60k Hz, hum and noise -70 dB (aux input). FM tuner sensitivity 2.5 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1kHz with 1.0 per cent harmonic distortion. Capture ratio 2 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, defeatable loudness circuit, high frequency filter and remote speaker output. Front-panel headphone jack. Either/both/none speaker switch. Size 16/2x5/2x113/4 in. Wt. 14 lbs.

.

Teac

.

  1. Teac AG 6500 - AM-FM stereo tuner-amplifier. RMS power output 50 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Frequency response 20-20k Hz±1 dB, power bandwidth 10-40k Hz, hum and noise -65 dB (phono input), FM tuner sensitivity 2.5 uV (IHF), S/N ratio 65 dB. Stereo separation 37 dB at 1kHz with 0.7 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2.0 dB. Tuning meter, stereo indicator, hi-blend circuit and defeatable interstation muting. High and low frequency filters, defeatable loundness circuit, two tape monitor circuits, independent tape dubbing circuit, dual power supplies, external preamp/ power-amp junction and two remote speaker outputs. Front-panel headphone jack. Either/ all/none speaker switch. Size 6/2x18/2x15% in. Wt. 31 lbs. 110-220 volts.

.

Telefunken

.

  1. Telefunken Hifi Compact 2000X - FM-stereo tuner-amplifier with speakers. RMS power output 15 watts per channel into 4 ohms. Frequency response 20-20k Hz ±1.5 dB. FM tuner has circular dial with special tuning/stereo indicator in center. Defeatable AFC. DIN jacks for phono and auxiliary plus headphone output. With two bookshelf speaker systems. Size: main unit 6!4x7%x10K in., speaker 6/4x7%x10!4 in. Total system wt. 34 lbs. 110-220 volts.
  2. Telefunken Allegretto TS 2020 - AM-FM stereo tuner-amplifier with speakers. RMS power output 7 watts per channel into 4 ohms. Frequency response 30-15k Hz ±1.5 dB. Tuning meter, stereo indicator and defeatable AFC. Slide-rule tuining dial. AM section tunes standard broadcast band, LW and SW (5.9-7.5 MHz). DIN input and output jacks. Two bookshelf-size speakers included. Size: main unit 19x4/4x8% in. 110-220 volts.
  3. Telefunken Concertino 401 - AM-FM stereo tuner-amplifier. RMS power output 15 watts per channel into 4 ohms. Frequency response 20-20k Hz ±1.5 dB. Diode tuner with seven settable push-buttons for station selection. Tuning meter, stereo indicator and defeatable AFC. Slide-rule tuning dial. AM section tunes standard broadcast band, LW and SW (6-16 MHz). DIN input and outputjacks. Front-panel headphone jack. Size 24x5/2x83/4 in. 110-220 volts.
  4. Telefunken Hymnus Hifi 101 - AM-FM stereo tuner-amplifier. RMS power output 30 watts per channel into 4 ohms. Frequency response 20-20k Hz ±1.5 dB. Diode FM tuner with seven settable push buttons for station selection. Tuning meter, stereo indicator and defeatable AFC. AM section tunes standard broadcast band, LW and SW (5.9-16 MHz). Tape monitor circuit, defeatable loudness circuit, rumble and noise filters, slide-type level controls and remote speaker output. DIN input and output jacks. Either/all/ none speaker switches. Size 251/4x4%x10/2 in. 110-220 volts.
  5. Telefunken Opus HIFI 301 - AM FM stereo tuner-amplifier. Solid state. RMS power 35 watts per channel into 4 ohms with 0.5 per cent harmonic distortion. Overall frequency response 20-1 8kHz 1.5 dB (aux input), IHF power bandwidth 20-20 kHz. Hum and noise -60 dB (phono input), -80 dB (aux input). IM distortion 1.0 per cent. FM sensitivity 1.8 uV for 26 dB quieting. FM tuning with pushbuttons and manual. Defeatable AFC. AM section tunes LW, MW, 5.9-6.2 MHz, and 7-18 MHz. High and low frequency filters. Defeatable loudness circuit. Tuning meter. Headphone jack. Size 23,/2x45/8x13l/4. Wt. 31 lbs. 110-220 volts.

.

Toshiba

.

  1. Toshiba SA-400 -- AM-FM stereo tuner-amplifier. Solid state. RMS power 30 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Overall frequency response 20-40kHz (aux input). Hum and noise -65 dB (phono input), -75 dB (aux input). FET FM front-end. FM sensitivity 2.5 uV (IHF). Stereo separation 35 dB at 1kHz. Defeatable loudness circuit. Selectable frequencies for bass and treble tone controls. Remote speaker output. Front panel headphone jack. Exterior preamp-power amp junction. Connection for 4-channel decoder. Control circuit for 4-channel. Main/remote speaker switch. 110-220 volts.
  2. Toshiba SA 500 - AM-FM stereo tuner-amplifier. RMS power output 35 watts per channel into 8 ohms with 0.4 per cent harmonic distortion. Frequency response 20-40k Hz ±1 dB, power bandwidth 8-80k Hz, hum and noise -65 dB (phono input), FM tuner sensitivity 1.8 uV (IHF), S/N ratio 66 dB. Stereo separation 35 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator, defeatable interstation muting and AFC circuits. Tape monitor circuit, defeatable loudness circuit, variable four-frequency tone equalization circuit, provision for 4-channel adapter and remote speaker output. Front-panel headphone jack. Either/all/none speaker switch. Size 173Xx5x14 in. Wt. 21 lbs. 110-220 volts.
  3. Toshiba SA-304 - AM-FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 10 watts per channel into 8 ohms with 0.8 per cent harmonic distortion. Frequency response 20-40k Hz ±2 dB, power bandwidth 20-30k Hz, hum and noise -60 dB (phono input). FM tuner sensitivity 2.5 uV (IHF), S/N ratio 62 dB. Stereo separation 30 dB at 1 kHz. Capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Tape monitor circuit, built-in matrix decoder and remote stereo speaker output. Front-panel 4-channel headphone jacks. Size 1 5%x5x11 Vi in. Wt. 18 lbs. 110-220 volts.
  4. Toshiba SA-504 - AM-FM stereo/4-channel tuner-amplifier with four amplifier channels. RMS power output 30 watts per channel into 8 ohms with 0.4 per cent harmonic distortion. Frequency response 20-40k Hz±1 dB, power bandwidth 10-18k Hz, hum and noise -65 dB (phono input). FM tuner sensitivity 1.8 uV (IHF), S/N ratio 66 dB. Stereo separation 35 dB at 1kHz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator, defeatable interstation muting and AFC circuits. Tape monitor circuit, speaker muting circuit, defeatable loudness, low and high frequency filters, built-in decoders for regular and SQ 4-channel matrix material, external preamp/power-amp junction, remote 4-channel speaker output. Front-panel 4-channel headphone jacks. Either/all/none speaker switch. Size 20x5x14 in. Wt. 33 lbs. 110-220 volts.

.

Wharfedale

.

  1. Wharfedale WE 40 - AM-FM stereo tuner-amplifier. Solid state. RMS power 14 watts per channel into 8 ohms with 1.0 per cent harmonic distortion. Overall frequency response 15-50kHz -1.5dB (aux input), IHF power bandwidth 25-30kHz. Hum and noise -60 dB (phono input). IM distortion 0.4 per cent. FM sensitivity 2.5 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1kHz with 1.0 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 3 dB. Defeatable loudness circuit. Exterior preamp-power amp junction. Illuminated function indicators. Remote speaker output. Front panel headphone jack. Phones/ ma in/ both/ remote speaker switches. Size Ml/2x5xMl/2. Wt 16 lbs. 1 10-220 volts.

.

Yamaha

.

  1. Yamaha CR 500 - AM-FM stereo tuner-amplifier. Solid state. RMS power 22 watts per channel into 8 ohms with 0.5 per cent harmonic distortion. Overall frequency response 30-30kHz -3 dB (aux input), IHF power bandwidth 18-46kHz. IM distortion 0.1 per cent. FET FM front-end. FM sensitivity 2.0 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 70 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and budness circuit. Front panel microphone and headphone jacks. Automatic AFC. High and low frequency filters. Remote speaker output. Microphone mixer. Exterior preamp-power amp junction. Phones/main/ both/remote speaker switches. Size 16^x 5/2x113/4. Wt. 20 lbs. 1 10-220 volts.
  2. Yamaha CR-700 - AM-FM stereo tuner-amplifier. Solid state. Same as Yamaha CR-500 except: 40 watts per channel and FM sensitivity 1.7 uV.

.

(es fehlen jetzt noch die) TUNER

.

AR

.

  1. AR FM Tuner - FM stereo tuner. Solid state. FET front-end. IHF sensitivity 2.0 uV, S/N ratio 65 dB. Stereo separation 40 dB at 400 Hz, 30 dB at 10kHz. Harmonic distortion 0.5 per cent. Selectivity 5o dB, IHF capture ratio 2.0 dB. Variable output level. Tuning meter. Defeatable interstation muting. Size 15l/8x4l/4x97/8. 110-220 volts.

.

Dokorder

.

  1. Dokorder 8070 - AM-FM stereo tuner, solid state, FET circuitry, IHF usable sensitivity on FM 4 uV, frequency response 20-20,000 Hz ±2 dB, harmonic distortion 1 per cent, signal to noise ratio 55 dB, selectivity 45 dB, image rejection 50 dB, cross modulation and IF rejection 70 dB, stem separation 35 dB. Defeatable interstation muting. AFC. Spotlight dial indicator, tuning meter. Dual voltage. With case, walnut side panels.

.

Dual

.

  1. Dual CT-17 - AM-FM stereo tuner. FM sensitivity 2.0 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1kHz with 1.0 per cent harmonic distortion. Selectivity 66 dB, capture ratio 2.5 dB. Diode FM tuner section with five push buttons for station selection. Tuning meter, stereo indicator, adjustable interstation muting and defeatable AFC. AM section tunes standard broadcast band, LW and SW (5.6-15.4 MHz). DIN output jacks. Size 16/2x41/4x131/4 in. Wt. 9 lbs. 110-220 lbs.

.

Dynaco

.

  1. Dyna FM-5 - FM stereo tuner. Solid state. FET front-end and ceramic filters in IF. FM sensitivity 1.7 uV (IHF) with 50 dB quieting at 5 uV. S/N ratio 65 dB. Stereo separation 40 dB at 1kHz, 30 dB at 10kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity65dB, IHF capture ratio 1.5 dB. Defeatable interstation muting. Connection for 4-channel decoder. Assembled or kit. Size 1 3I/2x9x41/4. Wt. 11 lbs. 110-22.0 volts.

.

Harman-Kardon

.

  1. Harman-Kardon Citation 14 - FM stereo tuner. FM sensitivity 2.0 uV (IHF), S/N ratio 70 dB. Stereo separation 45 dB at 1kHz with 0.35 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2.0 dB. Output level controls, variable threshold interstation muting and stereo switching circuits, built-in Dolby noise reduction circuit, stereo noise filter, tuning meter, S/N meter, stereo indicator, 4-channel broadcast decoder jack, scope output. 110-220 volts.
  2. Harman-Kardon Citation 15 - Same as Harman-Kardon Citation 14 except does not have built-in Dolby noise reduction circuitry.

.

Heathkit

.

  • Heathkit AJ-15 - FM stereo tuner. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 1 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Tuning meter, stereo indicator, variable stereo threshold, interstation muting, multiplex phase control, front-panel headphone jacks. Output level and balance controls. Size 43/4x1 7x12/2 in. Wt. 18 lbs.
  • Heathkit AJ 1510 - Digital FM stereo tuner. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 0.35 per cent harmonic distortion. Selectivity 95 dB, capture ratio 1.5 dB. Diode tuner controlled by frequency synthesizer with digital readout of selected frequency. Frequency accuracy 0.005 per cent. Stations selected with digital push buttons, punched cards or auto-sweep mode. Defeatable interstation muting and stereo only mode. Signal-strength and multipath meter. Size 6x161/2x14% in. Wt. 23 lbs.

.

JVC-Nivico

.

  1. JVC Nivico VT-500 - AM-FM stereo tuner. FM sensitivity 2.0 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1 kHz with 0.6 per cent harmonic distortion. Selectivity 50 dB, capture ratio 2.5 dB. Tuning meter and signal-strength meter, interstation muting,
  2. JVC Nivico VT-900 hi-blend, jack for 4-channel broadcast decoder. Size 5/2x1 5x12 in. Wt. 16 lbs. 110-220 volts.
  3. JVC-Nivico VT-900 - FM stereo tuner. FM sensititvity 1.7 uV (IHF), S/N ratio 65 dB. Stereo separation 38 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.8 dB. Digital readout dial, hi-blend control, interstation muting defeat, tuning meter and illuminated tuning aid, stereo indicator, stereo-only mode, 4-channel broadcast decoder jack, output level control. Size 5/2x163/4x12y2 in. Wt. 20 lbs. 110-220 volts.
  4. JVC-Nivico MCT-V7E - AM FM stereo tuner. FM sensitivity 1.7 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 1 kHz with 0.6 per cent harmonic distortion. Selectivity 70 dB. Tuning and signal strength meters, stereo indicator, hi-blend control, defeatable interstation muting, output level control, 4-channel broadcast decoder jack. Size 5/2x17x12 in. Wt. 17 lbs. 110-220 volts.

.

Kenwood

.

  1. Kenwood KT-2001 - AM-FM stereo tuner. Solid state. FET front-end. FM sensitivity 2.0 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1kHz with 0.7 per cent harmonic distortion. Alternate channel selectivity 45 dB, IHF capture ratio 4.0 dB. Defeatable FM noise cancel. Tuning meter. Size 1 3x5x9V2. Wt. 972 lbs. 110-220 volts.
  2. Kenwood KT-4005 - AM-FM stereo tuner. FM sensitivity 1.9 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 400 Hz with 0.7 per cent harmonic distortion. Selectivity 60 dB, capture ratio 2.0 dB. Hi-blend control, defeatable interstation muting, tuning and signal strength meters, stereo indicator. Size 17x6x113/4 in. Wt. 18 lbs. 110-220 volts.
  3. Kenwood KT-6005 - AM-FM stereo tuner. FM sensitivity 1.5 uV (IHF), S/N ratio 70 dB at 400 Hz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.3 dB. signal-strength and tuning meters, stereo indicator, hi-blend control, defeatable interstation muting, output level control. Size 17x 6x113/4in. Wt. 18 lbs. 110-220 volts.
  4. Kenwood KT-7001 - AM-FM stereo tuner. FM sensitivity 1.5 uV (IHF), S/N ratio 60 dB. Stereo separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 90 dB, capture ratio 1.0 dB. Tuning and signal strength meters, stereo indicator, stereo only mode, output level control, multiplex filter, defeatable interstation muting, scope output (multipath). Size 16/4x5/4x11 in. Wt. 18 lbs. 110-220 volts.

.

Marantz

.

  1. Marantz 105 - AM-FM stereo tuner. FM sensitivity 2.8 uV (IHF), stereo separation 32 dB at 1kHz with 1.0 per cent harmonic distortion. Selectivity 48 dB, capture ratio 2.5 dB. Tuning meter, stereo indicator and defeatable interstation muting. Size 14Kx 43/4x12 in.
  2. Marantz 115 - AM-FM stereo tuner. FM sensitivity 1,7 uV (IHF). Stereo separation 42 dB at 1kHz with 0.3 per cent harmonic distortion. Selectivity 60 dB, capture ratio 1.6 dB. Output level control, hi-blend control, defeatable interstation muting, signal strength and tuning meters, FM muting threshold adjust, stereo indicator, 4-channel broadcast decoder jack. Size 1 5/2x5%x1 3 in.

.

National Panasonic

.

  1. National Panasonic ST-3400 - AM-FM stereo tuner. FM sensitivity 1.7 uV (IHF), S/N ratio 70 dB. Harmonic distortion (stereo) 0.5 per cent. Selectivity 65 dBf capture ratio 1.5 dB. Signal-strength meter, tuning/multipath meter, stereo indicator, hi-blend control, defeatable interstation muting, output level control. 4-channel broadcast decoder jack. Size 16x5/2x113/4 in. Wt. 18 lbs. 110-220 volts.
  2. National Panasonic ST-3600 — AM-FM stereo tuner. Solid state. FET FM front-end. Crystal filter in IF. FM sensitivity 1.7 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz, 25 dB at 10kHz, with 0.5 per cent harmonic distortion. Alternate channel selectivity 65 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and FM noise cancel. Variable output level. Tuning meter. Size 16V8x5V4x145/8. Wt. 21 lbs. 110-220 volts.

.

Onkyo

.

  1. Onkyo 433 - AM-FM stereo tuner. Solid state. FM tuner has 1.7 uV (IHF) sensitivity, S/N ratio 70 dB. Stereo separation 40 dB at 400 Hz, with 0.5 per cent harmonic distort ion. Adjacent channel selectivity 75 dB, IHF capture ratio 1.2 dB. Output voltage variable from 0 to 2 volts. Defeatable noise cancel and interstation muting. Tuning meter. Size 12V8X5X13V4. Wt. 17V2lbs. 110-220 volts.

.

Philips

.

  1. Philips RH 690 - AM-FM stereo tuner with Long Wave band. Solid state. FM sensitivity 7 uV for 26 dB quieting. FM distortion less than 4 per cent, frequency response 40 12,500 Hz 3 dB, channel separation 26 dB. Stereo indicator. Dual voltage. Rosewood, teak or walnut case.
  2. Philips RH 697 - AM FM stereo tuner with two Short Wave bands, 20 transistors, 14diodes. FM sensitivity (measured for 26 dB S/N) 7 uV EMF at 1 5 kHz devination. Distortion less than 1 per cent at 75kHz devination, crosstalk -35 dB at 1kHz, all specifications exceeding DIN 45,500 hi-fi norm. Automatic switching FM multiplex decoder with stereo indicator. 'Defeatable inter-station muting and AFC on FM. Variable bandwidth on AM. Moving-coil tuning meter. Flywheel tuning with separate dial pointers for AM and FM. Size 14'/8x4x10 in. Multi-voltage. Walnut finish.

.

Pioneer

.

  1. Pioneer TX-600 - AM-FM stereo tuner. FM sensititvity 2.2 uV (IHF), S/N ratio 70 dB, Stereo separation 40 dB at 1 kHz with 0.8 per cent harmonic distortion. Selectivity 45 dB, capture ratio 3 dB. Defeatable interstation muting, signal-strength meter, tuning meter, stereo indicator, separate AM and FM output level controls, FM multipath terminal. Size 1 7x 53/4x13% in. Wt. 18 lbs. 110-220 volts.
  2. Pioneer TX-1000 - AM-FM stereo tuner. FM sensitivity 1.7 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 70 dB, capture ratio 1.5 dB. Hi-blend filter, variable threshold defeatable interstation muting, separate AM and FM output level controls, headphone level control, front-panel headphone jack, tuning meter, signal-strength meter, stereo indicator. Recorder and multi-path outputs. Size 1 7x5%x1 3/2 in. Wt. 20 lbs. 110-220 volts.

.

Quad

.

  1. Quad FM3 - FM stereo tuner. FM sensitivity 2.0 uV (IHF), stereo separation 30 dB at 1 kHz. Illuminated tuning aid, stereo indicator, AFC. Size 10/4x3%x8 in. Wt. 8 lbs. 110-220 volts.

.

Revox

.

  1. Revox A76 - FM stereo tuner. Solid state. Has FET front-end and Gauss IF filter. FM sensitivity 1.0 uV for 30 dB quieting. S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz with 0.2 per cent harmonic distortion. Alternate channel selectivity 50 dB, IHF capture ratio 1.0 dB. Tuning and antenna orientation aid. 110-220 volts.

.

SAE

.

  1. SAE Mark Six - FM stereo tuner. Solid state. Has FET front-end and digital frequency readout. Butterworth IF filter. FM sensitivity 1.6 uV (IHF), S/N ratio 70 dB. Stereo separation 45 dB at 1kHz with 0.1 percent harmonic distortion. Alternate channel selectivity 75 dB, IHF capture ratio 1.9 dB. Oscilloscope tuning/antenna-orientation aid. Variable-threshold interstation muting. Defeatable FM noise cancel. Selectable audio output level. Jack for 4-channel decoder. Size 17X5Y4X10V2. Wt. 25 lbs.

.

Sansui

.

  1. Sansui TU666 - AM-FM stereo tuner. Solid state. FM section hasFETfront-end. FM sensitivity 2.5 uV (IHF), S/N ratio 65 dB. Stereo separation 35 dB at 400 Hz with 0.8 per cent harmonic distortion. Alternate channel selec-tivity45dB,IHFcaptureratio3dB. Defeatable interstation muting and noise cancel. Size 13V4X5V8X11. Weight 11 lbs. 110-220 volts.
  2. Sansui TU888 - AM-FM stereo tuner. Solid state. FM section has FET front-end and six ceramic filters in IF. FM sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 38 dB at 400 Hz. Harmonic distortion 0.5 per cent. Alternate channel selectivity 70 dB, IHF capture ratio 2.0 dB. Variable interstation muting. Defeatable automatic noise cancel circuit. Variable output level. Tape recorder outputs. Size 18x5'/2x12. Weight 16 lbs. With cabinet. 110-220 volts.
  3. Sansui TU999 - AM-FM stereo tuner. Solid state. Has MOSFET front-end and crystal-block filters in IF. FM sensitivity 1.8 uV (IHF), S/N ratio 65 dB. Stereo separation 38 dB at 400 Hz with 0.5 per cent harmonic distortion. Alternate channel selectivity 70 dB, IHF capture ratio 1.5 dB. Variable interstation muting. Defeatable FM noise cancel. Selectable AGC. Adjustable output levels. Tape recorder outputs. Size 17x6x12V2. Weight 22 lbs. 110-220 volts.

.

Scott

.

  1. Scott 301-S -- AM-FM stereo tuner. Solid state. FET FM front-end. Ceramic filters in IF. FM sensitivity 2.0 uV (IHF), S/N ratio 60 dB. Stereo separation 35 dB at 1kHz with 1.0 per cent harmonic distortion. Alternate channel selectivity 40 dB, IHF capture ratio 2.5 dB. Size 16x47/8x93/8. 110-220 volts.
  2. Scott 312 D - FM stereo tuner. FM sensitivity 1.2 uV (IHF), S/N ratio 65 dB. Stereo separation 40 dB at 1 kHz with 0.6 per cent harmonic distortion. Selectivity 65 dB. Defeatable interstation muting, output level control, tuning meter, stereo indicator, built-in headphone amplifier. Size 15x5/4x11% in. 110-220 volts.
  3. Scott 433 - FM stereo tuner. Solid state. Has digital frequency synthesizer with quartz crystal as reference standard for tuning. FM channel selection by preprogrammed cards or automatic scanning. FM sensitivity 1.9 uV (IHF), S/N ratio 67 dB. Stereo separation 35 dB at 1 kHz with 0.25 per cent harmonic distortion. Alternate channel selectivity 75 dB, IHF capture ratio 1.8 dB. RF frequency drift (error) 0.0001 5 per cent. Digital display of RF frequency. Defeatable muting and noise cancel. Illuminated function indicators. Includes one preprogrammed card for each of the 100 U.S. FM broadcasting frequencies. Adjustable output levels. Size 17/8x6x15. Wt. 24 lbs.

.

Sherwood

.

  1. Sherwood SEL 300 - FM stereo tuner. Solid state. FET FM front-end and 12 section IF filter. FM sensitivity 1.5 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1 kHz with 0.15 per cent (mono) harmonic distortion. Alternate channel selectivity 85 dB. Tuner has electronic digital read-out. Variable interstation muting. FM noise filter. Illuminated control indicators. Multipath indicator output connection. Output for 4-channel decoder. Front panel headphone volume control. Size 16/4x5/4x14. Wt. 25 lbs.

.

Sony

.

  1. Sony ST-5600 -AM-FM solid state stereo tuner, FET AM front end with 3-gang variable capacitor, solid state filter in IF stage. FM IHF sensitivity 3 uV, image rejection 43 dB, selectivity 60 dB, signal-to-noise ratio 65 dB, capture ratio 1.6 dB, frequency response 30-1 5,000 Hz 1 dB, stereo separation better than 38 dB at 400 Hz, harmonic distortion 0.7 per cent (FM stereo) and 0.3 per cent (FM mono). High blend switch. Defeatable AFC. Multi-voltage.
  2. Sony ST-5140 - AM-FM stereo tuner. FM sensitivity 1.8 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 400 Hz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.0 dB. Tuning meter, signal-strength meter, stereo indicator, defeatable interstation muting, hi-blend. Multipath output. Size 153/4x53/4x13/2 in. Wt. 16 lbs. 110-220 volts.
  3. Sony ST-5130 AM-FM stereo tuner. Solid state. FET front-end. FM sensitivity 1.5 uV (IHF), S/N ratio 75 dB. Stereo separation 42 dB at 1kHz with 0.3 per cent harmonic distortion. Alternate channel selectivity 90 dB, IHF capture ratio 1.0 dB. Defeatable interstation muting and AFC. Size 155/8x57/8x133/8. Wt. 16]/2 lbs. 110-220 Volts.

.

Superscope

.

  1. Superscope T-208 - AM-FM stereo tuner. FM sensitivity 5 uV (IHF), S/N ratio 60 dB. Stereo separation 30 dB at 1 kHz with 1.0 per cent harmonic distortion. Capture ratio 6 dB. Tuning meter and stereo indicator. Size 141/2x4/2x8 in. Wt. 6 lbs.

.

Teac

.

  1. Teac AT-100 - FM stereo tuner. Solid state. FET front-end and ceramic filters in IF. FM sensitivity 2.0 uV (IHF), S/N ratio 70 dB. Stereo separation 40 dB at 1kHz, 30 dB at 10kHz, with 0.5 per cent harmonic distortion. Fixed and variable audio outputs. Defeatable interstation muting and FM noise cancel. Tuning meter. Size 1 6/8x5V2XI 3. Wt. I6V2 lbs. 110-220 volts.

.

Toshiba

.

  1. Toshiba ST-500 - AM-FM stereo tuner. FM sensitivity 1.8 uV (IHF), S/N ratio 66 dB. Stereo separation 35 dB at 1 kHz with 0.5 per cent harmonic distortion. Selectivity 80 dB, capture ratio 1.5 dB. Hi-blend circuit, defeatable interstation muting, defeatable AFC, output level control, stereo indicator, tuning meter, signal-strength meter, 4-chan-nel broadcast decoder jack. Size 15%x5x12 in. Wt. 15 lbs. 110-220 volts.

.

Yamaha

.

  • Yamaha CT-700 - AM-FM stereo tuner. Solid state. FET FM front-end. FM sensitivity 1.7 uV (IHF), S/N ratio 70 dB. Stero separation 40 dB at 1kHz with 0.5 per cent harmonic distortion. Alternate channel selectivity 70 dB, IHF capture ratio 1.5 dB. Defeatable interstation muting and noise filter. Automatic AFC. Size 1534x5)4x11%. Wt. 17 lbs. 110-220 volts.

.

Because of the exceptionally large number of models in this SHOPPER, we will present the integrated-amplifier portion next month.

.

- Werbung Dezent -
Zurück zur Startseite © 2007/2024 - Deutsches Hifi-Museum - Copyright by Dipl.-Ing. Gert Redlich Filzbaden - DSGVO - Privatsphäre - Zum Telefon der Redaktion - Zum Flohmarkt
Bitte einfach nur lächeln: Diese Seiten sind garantiert RDE / IPW zertifiziert und für Leser von 5 bis 108 Jahren freigegeben - Tag und Nacht und kostenlos natürlich.

Privatsphäre : Auf unseren Seiten werden keine Informationen an google, twitter, facebook oder andere US-Konzerne weitergegeben.