.

• ADC-1. Designed for use with tone arms and turntables of the highest quality, the ADC-1 is individually calibrated and comes with complete performance report card. The stylus can be replaced in less than 10 seconds and comes out with a flick of your finger- no tools or special skill are required.
Specifications: Moving magnet; freq. resp. 10 to 20,000 cps ±2 db; output, 1.25 mv/cm rec velocity ; channel separation, 33 db at 1 kc, 29 db at 10 kc ; recommended load, 47k ohms; recommended tracking force-professional arms, 0.75-1.5 gms, effective stylus mass, 0.5 mg ; compliance-lateral, 20 x 1O-0 cm/dyne, vertical, 20 x 10-° cm/dyne ; no. of terminals, 4 : mounting dimensions, std; weight, 6.8 gms, stylus radius, 0.6 mil. Price, "$"49.50; Audio Dynamics.
1. ADC-2,......................... $46.50
2. ADC-3 ......................... $37.50
.

• ELAC 322 with 0.52-mil Diamond Stylus. The new ELAC 322 magnetic cartridge is specifically designed for stereo records and utilizes a 0.52-mil diamond stylus. Maximum compliance has been obtained by reducing moving mass without sacrificing stylus shank rigidity. This has been achieved by employing magnesium, which is lighter and more'rigid than aluminum. The resultant low distortion achieved in the ELAC 322 (less than 2% IM and less than 1% harmonic distortion) has rarely been feasible in electro-mechanical transducers.
Specifications: Freq. response 20 to 20,000 cps ±2 db; output, 7 mv/cm rec. velocity ; channel separation, 25 db at 1 kc, 20 db at 10 kc ; recommended load, 33-50k ohms ; recommended tracking force-professional arms, 1.5 gms, changers, 2.5 gms, effective stylus mass, 1.2 mg ; compliance-lateral, 14 x 10-6 cm/dyne, vertical, 14 x 10-6 cm/dyne ; inductance, 650 mh ; 4 terminals ; mounting dimensions, std.; weight, 11 gms. including brackets. Additional features ; Mu-metal Shielded Case. Stylus assembly is removable and can be replaced without tools. Price, diamond, $49.50 ; replacement styli, $25.00. Benjamin. 1. ELAC stereo/mono cartridge model 222 $39.50

• DMS-900 Magnetic Stereo Cartridge. Featuring excellent performance with tracking force of less than 2 grams, the Dual DMS-900 is constructed so that stylus can be easily replaced-just lift out the easily grasped assembly.
Specifications: Variable reluctance; freq. resp. 20 to 20,000 cps ± 3 db ; output, 1 mv/cm rec. velocity ; channel separation, 28 db at 1 kc ; recommended load, 12-47 k ohms ; recommended tracking force-professional arms, 1.5-5 gms, changers 2-5 gms ; compliance- lateral 4 x 10"6 cm/dyne, vertical, 3 x 10"8 cm/ dyne ; inductance, 250 mh, d.c. resistance 800 ohms/channel ; no. of terminals, 4 ; mounting dimensions, std. ; weight 14 gms. Price, diamond, $34.50 ; replacement styli, $17.25. United Audio.

• Stereodyne II. Magnetic moving-iron stereo cartridge featuring a symmetrical design utilizing a quadri-coil push-pull circuit providing low impedance, a hum-bucking push-pull system, and complete mumetal shielding for near-zero hum pickup under any conditions. High output ensures a superior signal-to-noise ratio. Exceptional tracking, high compliance, and low moving mass for prolonged record and stylus life.
Specifications: Freq. response 30 to 15k cps ± 2 db ; output, 1.5 mv/cm rec. velocity ; channel separation, 30 db at 1 kc, 15 db at 10 kc : recommended load, 47k ohms; recommended tracking force-professional arms, 1-2.5 gms, changers, 2-4 gms, effective stylus mass, 1 mg ; compliance-lateral, 7 x 10-° cm/dyne, vertical, 7 x 10-6 cm/dyne ; inductance, 185 mh ; d.c. resistance, 1200 ohms ; 4 terminals ; mounting dimensions, %" ; weight, 10 gms. Additional features: extremely low hum pickup ; replaceable stylus ; built-in stylus protection feature (retractable within nose cone). Price, diamond, $29.95 ; replacement styli, $14.95. Dynaco.

• Model 880P. "Dyna-Life" stylus, one of the lightest, hand polished diamond 0.6-mil radius tip.
Specifications: Freq. response 8 to 20,000 cps ± 2 db ; output, 8 mv ; channel separation, 30 db at 1 kc, 20 db at 10 kc ; recommended load, 47k ohms, recommended tracking force- professional arms, 0.5-3 gms, changers, 1.5-5 gms, effective stylus mass, 0.5 mg; compliance -lateral, 20 x 10-« cm/dyne, vertical, 20 x 10-° cm/dyne ; d.c. resistance, 500 ohms ; mounting dimensions, std. ; weight, 12 gms.
Additional features: No magnetic attraction, virtually indestructible "Dyna-Life" stylus. Price, diamond, $19.95; replacement diamond styli, $12.95. Empire Scientific 1. Model 880 same as above except lower com-pliance, 0.7-mil stylus.

• F-7 Stereo Cartridge System. Low output stereo cartridge, moving-coil design, in combination with transistorized pre-preamplifier. Preamp has own long-life power supply which brings up output of F-7 to usable level. Through this combination of low-mass low-output cartridge and self-contained pre-preamplifier the F-7 has low distortion and prolongs life of record collection through use of low tracking forces.
Specifications: Freq. response 20 to 20,000 cps ; output, cartridge 0.5 mv ; output of pre-preamp 10 mv (1 kc 5 cm/sec) ; channel separation, 25 db 20 to 6000, 15 db 0000 to 20,000 cps range; recommended load, above 8k ohms ; recommended tracking force-% to 2 grams, effective stylus mass, 0.3 mg ; compliance-lateral, 23 x lO^3 cm/dyne, vertical, 20 x 10-6 cm/dyne ; inductance, 2.5 mh ; d.c. resistance, 30 ohms ; 4 terminals ; mounting dimensions, std. ; weight, 7 gms.
Additional features : Low impedance of F-7 cartridge allows use of long cables between cartridge and pre-preamp, up to 50 ft., output impedance of F-7 pre-preamp is 8000 ohms allowing use of up to 25 ft. of lead to main amplifying equipment. Price, diamond, $85.00. Fairchild.
1. SM-2 stereo cartridge, removable 0.7- mil stylus ...................... $37.50
2. 225A mono moving-coil cartridge 1.0 mil ............................ $37.50
3. 225B mono moving-coil cartridge 2.5 mil ............................ $37.50
.

• VR-1000-7 Orthonetic Stereo Cartridge. A 0.7-mil diamond stereo cartridge utilizing the variable reluctance principle of operation. The wide frequency response, 20-20,000 cps, permits the reproduction of more of the subtle overtones as originally recorded.
Specifications: Freq. response 20 to 20,000 cps ±3 db; output, 1 mv/cm rec. velocity ; channel separation, 20 db at 1 kc ; recommended load, 47k ohms ; recommended tracking force-professional arms, 3 gms min., changers, 7 gms ; compliance-lateral, 4.5 x 10~6 cm/dyne, vertical, 4 x 10-6 cm/dyne; inductance, 400 mh ; d.c. resistance, 1100 ohms ; 4 terminals ; mounting dimensions, % in ; weight, 13% gms. Price, diamond $24.95 ; replacement styli, $9.95.
1. VR-1000-5 0.5 mil stylus................... $29.95
2. VR-227 stereo cartridge .................... $16.95
3. 4C-052 mono cartridge........................ $16.95
4. 4CD-01D-02D mono broadcast cartridge .. $19.95
.

• "Classic" Stereo Cartridge. The Classic cartridge uses the same basic design as the Laboratory Series cartridge, and is manufactured on a small assembly line basis with extremely close tolerances. The bass response in the Laboratory and Classic Series is identical. The midrange is very close, and the high frequency response differs but slightly.
Specifications: moving coil ; freq. resp. 15 to 28,000 cps ±1 db ; output, 0.9 mv/cm rec. velocity ; channel separation, 25 db at 1 kc ; recommended load, above 5,000 ohms; recommended tracking force-professional arms, 3 gms; effective stylus mass, 0.5 mg; compliance, 12 x 10-6 cm/dyne ; d.c. resistance, 1100 ohms ; no. of terminals, 4. Additional features : one year unconditional guarantee, plus four additional years for stylus against normal wear. Price, diamond, $37.50. Grado Laboratories.
1. "Senator" cartridge .............. $24.95
2. "Laboratory" cartridge ............ 49.50

• M-10 07 Stereo Cartridge. Moving-magnet cartridge with unusual magnet structure which reduces stylus mass.
Specifications: Freq. response 20 to 20,000 cps ; output, 1 mv/cm rec. velocity ; channel separation, 22 db at 1 kc ; recommended load, 100k ohms ; recommended tracking force-professional arms, 1.5-3 gms ; compliance--lateral and vertical, 4.5 x 10~6 cm/dyne ; d.c. resistance, 600 ohms ; 4 terminals ; mounting dimensions, std ; weight, 12 gms. Micro Seiki Ltd.

• VS-1000, Moving-Coil Cartridge. A high quality moving-coil cartridge featuring easily replaceable stylus assembly. The output is relatively high for a moving coil and the frequency range is relatively wide.
Specifications: Type, moving coil ; freq. resp. 10 to 20,000 cps ± 3 db ; output, 5 mv ; channel separation, 30 db at 1 kc, 20 db at 10 kc ; recommended load, 100-100k ohms ; recommended tracking force-professional arms, 2 gm ; compliance-lateral, 10 x 10-6 cm/dyne, vertical, 10 x 10-° cm/dyne; d.c. resistance, 80 ohms ; no. of terminals, 4 ; mounting dimensions, 12.7 mm ; weight, 13.5 gms. $49.50 (0.7-mil), $59.50 (0.5-mil). Neat.

• NEUMANN DST 62 Double Dynamic Stereo Cartridge. This is the latest model and development of the well-known DST unit. Improvements include elimination of rubber membrane, complete enclosure of cartridge bottom. Torsion bar re-enforced, making misalignment impossible even after a long time.
Specifications: Freq. response 30 to 15k cps + 2 db; output, 1 mv/cm rec. velocity ; channel separation, 25 db at 1 kc, 25 db at 10 kc ; recommended load, 50 ohms; recommended tracking force-professional arms, 6 gms, effective stylus mass, 1 nig; compliance-lateral, 3.6 x 106 cm/dyne, vertical, 3.6 x 1(H cm/dyne; d.c. resistance, 18 ohms; capacitance, 0 pf; 5 terminals; mounting dimensions, special ; weight, 30 gms. Price, diamond, $79. 50; replacemeni styli, $20.00. Gotham Audio.
.

• SPU-T Cartridge. The Ortofon stereo cartridge, Model SPU, has extremely high compliance and low inertia of the stylus armature. The electromagnetic elements are wound with an extra pure copper wire into long thin coils. Thus, the inertia and directional forces are reduced to a minimum and consequently the force required for tracking at both ends of the audio spectrum is very small. The stylus arm is composed of a special thin and light alloy strip to ensure compliance in both planes. "Prime diamonds" are used for the stylus.
Specifications: Freq. response 20 to 20,000 cps ± 2 db ; output, 14 mv ; channel separation, 25 db at 1 kc, 20 db at 10 kc ; recommended load, 50k ohms ; recommended tracking force --professional arms, 1-2 gms, effective stylus mass, 1 mg; compliance-lateral, 10 x 10-6 cm/dyne, vertical, 10 x 10-° cm/dyne ; d.c. resistance, 1,8 ohms ; 4 terminals ; mounting dimensions, std.; weight, 17 gms with trans formers. Additional features: Minimum of 20711) channel separation is maintained thru-out audible range.
Price, diamond, $49.95 ; replacement styli, $15.00. Elpa Ind.
1. SPU/GT Mounted in shell for Ortofon & SME ......................... $49.95
2. SPU/ESH Mounted in shell for ESL arms ........................... $49.95
3. A new model with an elliptical stylus will be introduced shortly ........ $75.00
.

• Model GA/38 ATG Stereo Fluxvalve. Model U38/AT cartridge with the D3807ATG "Safe V-Guard" "Floating Stylus" mounted in a plug-in head for the Garrard Type A turntable. Specifications: Freq. response 20 to 17,000 cps ± 2 db ; output, 2 mv ; channel separation, 35 db at 1 kc ; recommended load, 47k-100k ohms; recommended tracking force-professional arms, 1-3 gms, changers, 3 gms; inductance, 245 mh ; d.c. resistance, 410 ohms ; capacitance, 250 pf; 4 terminals ; mounting dimensions, %" ; weight, 14 gms.
Price, diamond, $52.50; replacement styli, $17.00.
1. Model U38/AT (cartridge with D3807AT stylus not in shell) ....... $46.50
2. Model G6/38ATC (U38/AT with D3807ATG stylus mounted in plug-in
shell for Garrard AT6 Turntable) ..... $52.50
.

• Model M33 Stereo Dynetic Cartridge. Shure's finest cartridge. Available with either 0.5- or 0.7-mil stylus. Compliance of 0.5-mil stylus permits tracking at less than one gram ; 0.7-mil at from 1.5 to 3 grams. Completely new, super-rugged stylus assembly is encased in plastic "grip," making stylus changing as easy as plugging in an electric cord. Mumetal shielding prevents pick-up of hum.
Specifications: Freq. response 20 to 20,000 cps ± 2.5 db ; output, 1 mv/cm rec. velocity ; channel separation, 22.5 db at 1 kc, 10 db at 10 kc ; recommended load, 47,000 ohms; effective stylus mass, 1.3 mg; compliance- lateral, 22 x 10-° cm/dyne, vertical, 22 x 10 « cm/dyne ; inductance, 600 mh ; d.c. resistance, 750 ohms ; capacitance, 70 pf ; 4 terminals ; mounting dimensions, std.
1. M77 (for tracking at 3-6 grams) .................. $27.50
2. M99/A scratchproof "Gard-A-Matic" for Garrard Type A
3. M99/AT6 scratchproof "Gard-A-Matic" for Garrard Type AT6
4. M99/M10 scratchproof "Gard-A-Matic" for Miracord
5. M3D stereo dynetic cartridge
.

• "Velocitone" Mark III. Designed for superior velocity, magnetic or ceramic input systems. Produces signals free of magnetic hum. Mark III version utilizes new "Sono-Flex" stylus virtually eliminating broken needles and increasing compliance.
Specifications: Freq. response 20 to 20,000 cps ±2 db; output, 2.8 mv ; channel separation, 30 db at 1 kc, 8 db at 10 kc ; recommended load, 47-100k ohms ; recommended tracking force-professional arms, 2-4 gms, changers, 3-5 gms, effective stylus mass, 4 mg ; compliance--lateral, 6 x 10-° cm/dyne, vertical, 6 x 10-6 cm/dyne ; capacitance, 490 pf ; 4 terminals ; mounting dimensions, std. ; weight 3.2 gms. Price, dual diamond, $22.25 ; sapphire-diamond, $19.25 ; replacement styli, $6.00 ; $9.50.

• SX-1 Stereo Cartridge. The Sonovox SX-1 represents a refinement in moving- magnet cartridges. The magnet is spherical in shape thus achieving a uniform field. Extremely low mass and high compliance of the vibrating system produce minimum record wear.
Specifications: Moving magnet; freq. resp. 20 to 20,000 cps ± 1 db ; output, 4 mv ; channel separation, 20 db at 1 kc, 20 db at 10 kc; recommended load, 50k ohms ; recommended tracking force-professional arms, 3 gms ; compliance-vertical, 3 x lO"6 cm/dyne ; d.c resistance, 150 ohms; no. of terminals, 4 ; weight, 12.5 gms. Price, diamond, $30.00.
.

• Model 481AA Stanton "Calibration Standard" Stereo Fluxvalve. For use with ultra-lightweight tone arms capable of tracking within the range from 1/4 to 3 grams. Supplied with the D4005AA "V-Guard" diamond stylus assembly.
Specifications: Freq. response 20 to 10,000 cps ±1 db; output, 0.5 mv/cm rec. velocity ; channel separation, 35 db at 1 kc; recommended load, 47k ohms; recommended tracking force-professional arms, ^-3 gms ; inductance, 640 mh ; d.c. resistance, 3200 ohms ; capacitance, 250 pf; 4 terminals ; mounting dimensions, 1/2" ; weight, 11 gms. Price, diamond, $49.50; replacement styli, $19.50. Stanton Magnetics.
.

• C-66, LDM Stereo Cartridge. Stress-generator design, 0.7-mil diamond stylus, 0.3 milligram tip mass. Compliance more than 30 x 10"6 cm/dyne at 1/2-gram tracking force, 15 x 10-6 cm/dyne at 1.2-gram tracking force. Matching networks (included) to low-level mag. input.
Specifications: Freq. response 20 to 20,000 cps +2 db; output, 5-7 mv ; channel separation, 35 db at 1 kc, 25 db at 10 kc; recommended load, 47,000 ohms; recommended tracking force-professional arms. 1 gm ; effective stylus mass, 0.3 mg; compliance- lateral, 18 x 10-6 cm/dyne, vertical, 18 x 10^6 cm/dyne ; capacitance, 300 pf ; 4 terminals ; mounting dimensions, std. ; weight, 4 gms. Price, diamond, $39.50.
1. PS-11 stereo pickup system, complete $129.50
2. PS-ll-K conversion kit for all Weathers viscous-damped arms .... $ 99.00
.

.

• TA-12. Integrated arm and cartridge of symmetrical design providing exceptional tracking with low distortion, readily adjustable stylus pressure, plug-in cartridge, single-hole mounting, stylus azimuth adjustment, and "Isodyne" dynamic equilibrium (even when playing an uncut disc, the arm has no tendency to skate towards the center of the record). Easily adjusted height of both arm and rest.
Specifications: Over-all length of arm, 12" ; distance from arm axis to turntable spindle, 8%" ; height range of turntable, 0" to 2" ; gimbal suspension ; stylus force range, 0 to 4 gms ; arm material, aluminum ; pickup mounting, plug-in ; overhang, %" ; over-all weight, 1 lb. Price $49.95. Dynaco. 1. TA-16 16" version of above........ $59.95

• Model 980 Dynamically-Balanced Arm. Dynamic balance achieved by means of offset pivot design. Calibrated gram scale, ((accurate to ±0.1 gram). Stylus overhang adjustment. Vertical height adjustment for both arm & arm rest. Easy plug-in installation-no wiring or soldering. Automatic "Dyna Lift"- lifts arm from record at end of music.
Specifications: Over-all length of arm, 12%" ; distance from arm axis to turntable spindle, 9" ; height range of turntable, %" to 2" ; ball bearing suspension vert & lateral; stylus force range, 0 to 8 gms; aluminum pickup head; arm material, aluminum and brass ; pickup mounting, nylon ; screw spacing, %" ; offset angle, 23.8 deg; overhang, %" ; range of cartridge weights for zero adjustment, 2 to 25 gms ; maximum tracking error, ± 0.65 deg; additional features, plug-in cable (5 wire); arm resonance-8 cps, lateral; 8 cps, vertical. Price $50.00 ; cartridge brackets, $1.95.
.

• 500 Anti-Skating Arm and SM-2 Stereo Cartridge Combination. Integrated arm-cartridge with "anti-skating" that counteracts tendency of an arm to "skate" toward center of record. Model 500 is free from erratic and improper stylus tracking and resulting tracing distortion. SM-2 cartridge integrated into arm provides high compliance and high separation over a wide frequency range.
Specifications: Over-all length of arm, 12" ; distance from arm axis to turntable spindle, 8%" ; height range of turntable, 2%" to 4" ; point bearing suspension ; stylus force range, 2.5 to 3 gms; arm material, alum. ; pickup mounting, 3-48 screws RETMA ; screw spacing, %" ; offset angle, 23% deg; overhang, %" ; range of cartridge weights for zero adjustment, 2 to 12 gms; maximum tracking error, 1.2° ; additional features, fixed dynamic balance ; arm resonance-12 cps, lateral ; 14 cps, vertical; mounting dimensions, %" hole, 3 screws.
Price $58.00 ; extra pickup heads for Model 500A/501 only $4.90..
1. 500A anti-skating arm only w/removable head ...................... $29.95
2. 501 16" anti-skating arm w/removable head ...................... $37.50
.

• Laboratory Tone Arm. The Grado tone arm ino«.rPOrates separate balance adjustments for the v* Meal and lateral planes of arm movement, regardless of weight and mass vibrations. The result of balance is a reduced susceptibility to mechanical shock and acoustic feedback.
Specifications: Over-all length of arm, 10 1/4" ; distance from arm axis to turntable spindle, 8 b/16" ; type of suspension, balance, with spring ; stylus force, % gm min. ; type of pickup head, slide mounts; arm material, walnut; pickup mounting, standard on slide ; overhang, 3/4" ; maximum tracking error, ±0.5 deg; additional features, stylus overhang adjustable, interchangeable cartridge slides ; arm resonance-11 cps
Price, $39.50; extra cartridge slides, $2.95. Grado Laboratories.
1. Same, w Laboratory cartridge ...... $85.00
2. Same, w Classic cartridge ......... $75.00
3. Same, w Senator cartridge ......... $63.00
.

• Broadcast Type Tone Arm, Model 208-S. Transcription tone arm for high fidelity, broadcasting, disc calibration, commercial sound, dubbing, and pressing inspection.
Specifications: Over-all length of arm, 15" ; distance from arm axis to turntable spindle, 10 5/8" ; height range of turntable, 1" to 2" ; stylus force range, 0.5 to 12 gms ; arm material, aluminum ; pickup mounting, on removable slide; screw spacing, 1/2"; overhang, 0.533" ; range of cartridge weight for zero adjustment, 5 to 15 gms ; maximum tracking error, 1° 55'; additional features, plug-in cartridge slide ; arm resonance-6 cps, lateral; 6 cps, vertical; over-all weight, 2 lbs.
Price $49.50; extra pickup heads, $6.40. Gray Div.
1. Model 208-S/C, as above plus slot for
C.E. turn-around cartridge......... $49.50
2. 212 Series 12" transcription tone arm $35.50
.

• STA-12. Designed for use with Neumann DST-12 cartridge. An integral part of the Neumann stereo disc-cutting lathe.
Specifications: Over-all length of arm, 12" ; distance from arm axis to turntable spindle, 8-5/16" ; height range of turntable, 1" to 3" ; stylus force range, 0 to 7 gms; arm material, metal ; pickup mounting, 4 pins, diamond config. ; offset angle, 22.7 deg; range maximum tracking error, 1.19 deg; additional features, rubber isolated counterweight, dynamic balance ; arm resonance-8 cps, lateral; 8 cps, vertical; over-all weight, 1 lb. 1 1/2 oz.; mounting dimensions, center hole 7/8", 3 screw holes. Price $79.50. Gotham Audio.
.

• RMG-212 Tone Arm. Precision ball bearings are used for both horizontal and vertical planes assuring perfect tracking at even minimum stylus force. Lateral balance by the special shape of the Duralumin tube arm enables perfect record tracking even up to 30° out of level. The counterweight is calibrated in grams from 0 to 10. The plug-in shell accepts any cartridge and is adjustable for cartridge overhang.
Specifications: Over-all length of arm, 12" ; distance from arm axis to turntable spindle, 9%"; height range of turntable, 2%" to 3%" ; gimbal suspension ; stylus force range, 0 to 7 gms ; plug-in pickup head ; arm material, duralum ; pickup mounting adjustable; screw spacing, std. ; offset angle, 22.7 deg; overhang, %" ; cartridge weight for zero adjustment preset 31 grams ; maximum tracking error, 1.19 deg; additional features, plug-in audio cables ; arm resonance-8 cps, lateral ; 8 cps, vertical; over-all weight, 1 lb.; mounting dimensions, 3 hole, l1/^" centers. Price $54.95 ; extra pickup heads, $5.00. Elpa Ind.
1. RMG-212T with predrilled Thorens arm board ....... $59.95
2. RMG-309 16" arm ............... $59.95
3. SMG-212 12" arm................ $29.95
4. SKC-212 12" arm ................ $19.95
.

• Model 3009 Shure-SME Series 2. Extraordinarily close tolerance and standards. Its "secret" (if it has one) is care in manufacturing and testing and utterly accurate adjustments for every critical factor in tracking.
Specifications: Over-all length of arm, 12 1/4" ; distance from arm axis to turntable spindle, 8.43" ; height range of turntable, 2 3/8" to 3 1/4" ; knife-edge suspension ; stylus force range, % to 5 gms ; removable, locking collar pickup head ; arm material, wood-lined stainless steel; pickup mounting, standard ; screw
spacing, %" ; range of cartridge weights for zero adjustment, 5 to 20 gms ; additional features, complete with output socket & plug; arm resonance-15 cps, lateral ; 15 cps, vertical ; over-all weight, 1 lb. 5 ozs.
Price Model 3009 Shure-SME  $89.50 ;
extra pickup heads, $5.50. Shure Bros.
1. Model 3012 Shure-SME Series 2 (longer version) ................. $99.50
2. Model 222 "Studio Dynetic" 12" integrated arm and cartridge ........ $89.50
3. Model 226 "Studio Dynetic" 16" integrated arm and cartridge ........ $89.50
4. Model 232 (12") tone arm........ $29.95
5. Model 236 (16") tone arm ....... $31.95
.

• Model 200 Stanton Unipoise Arm. Patented Stanton "Unipoise" single-pivot bearing for friction-free motion in all planes. Lightweight construction gives low mass for tracking mono and stereo records at only 1/2 gram.
Specifications: Over-all length of arm, 11 3/8" ; distance from arm axis to turntable spindle, 8 3/16" ; height range of turntable, 1" to 2 1/2" ; single-pivot bearing suspension ; stylus force range, 0 to 3 gms ; arm material, aluminum and steel; pickup mounting, 1/2 inch ; screw spacing, 1/2" ; offset angle, 21 deg ; overhang, 17/32" ; range of cartridge weights for zero adjustment, 7 to 15 gms ; maximum tracking error, 1 deg; over-all weight, 7 oz. Price $36.00.
.

• BTD-12S Tone Arm. This tone arm has been built to match perfectly the high performance of Thorens precision turntables for which it is specially adapted. It Avill give equally outstanding results on any other turntable presenting a sufficiently low vibration level.
Specifications: Over-all length of arm, 12%" ; distance from arm axis to turntable spindle, 7%" ; height range of turntable 2" to 3%" ; bearing suspension ; stylus force range, 0 to 8 gms ; plug-in pickup head ; arm material, alum. ; pickup mounting, adjustable ; screw spacing, std. ; offset angle, 25.15 deg; overhang, 11/16" ; range of cartridge weights for zero adjustment, 0 to 19 gms; maximum tracking error, 0.5 deg; additional features, stylus remains in vertical plane for any height adjustment; built-in cueing device for remote raising and lowering arm ; arm resonance- 16 cps, lateral ; 16 cps, vertical; over-all weight, 1 lb. ; mounting dimensions, 3-hole, 1%-inch. Price $50.00 ; extra pickup heads, $5.00. Elpa Ind.
.

• MT-66 Universal Stereo Tone Arm. Mounts on any make turntable, accepts any make cartridge, by virture of interchangeable "plug-in" head. Ideal for cartridges capable of tracking at 3 grams or less. Full-time vertical and lateral viscous damping as employed in famous Weathers "Professional" integrated system. Micrometer tracking force adjustment. No skating. No spring biasing. Rubber shock mount isolates arm from mechanical vibration. Non-resonant walnut wood in oiled finish. Rubber tone arm rest included.
Specifications: Over-all length of arm, 11%" ; distance from arm axis to turntable spindle, 8%" ; height range of turntable, %" to 1%" ; viscous damped suspension ; stylus force range, 0 to 10 gms ; arm material, wood ; pickup mounting, standard ; screw spacing, standard; offset angle, 20 deg; overhang, %x %" ; range of cartridge weights for zero adjustment, 0 to 17 gms; maximum tracking error, 3 deg ; additional features, 5% gr additional balance weight supplied; over-all weight, 260 gr. ; head adapter weight, 9% £r. Price $31.50; extra pickup heads, $2.95. Weathers Industries.
.

.

• 940. The EMT 940 is a high precision professional turntable for use with any arm and cartridge combination. Light Plexiglas strobe-calibrated secondary turntable allows accurate cuing to a musical beat, operating by a mechanical brake. Back-up angles are indicated for all speeds. Tonearm lift and lowering device. Electronic remote control of turntable brake. Optional accessory kit.
Specifications: Speeds--16%, 45, 33 V&, 7<S rpm ; rim drive ; synchronous motor ; turntable diameter. 13" ; turntable weighTT 8 lbs. ; shaft diameter, %" ; turntable material, cast iron; felt mat; wow and flutter 0.3% peak-to-peak or 0.1% rms ; dimensions of chassis, 15%" x 19%" ; clearance required above mounting board, 2" ; below 7" ; controls on/off, stereo selector; over-all weight. 22 lbs. Price, $595.00. Accessories, electronic brake $89.50. Gotham Audio.

• 412-1B. Quality turntable with time-proven double-belt drive and self-lubricating synchronous motor; provides professional performance. Non-magnetic, dynamically-balanced turntable rests on rotating ball-thrust bearing in nylon seat. Motor suspension system eliminates vibration. Exceeds NAB specifications. Supplied with heavy gage steel mounting board; requires only wraparound base.
Specifications: Speed-33 Vh rpm ; double-belt drive ; synchronous motor ; turntable diameter, 12" ; turntable weTgnT, 8 lbs ; shaft diameter, W ; turntable material, aluminum and densite ; wow, 0.10% ; flutter, 0.02%; di-
mensions of chassis, 14"xl6%"; clearance required above mounting board, 1" ; below, 5%"; type of mounting, drop-in assy; controls, on-off; provision for arm mounting, arm mounting plate.
Price, $99.00 assembled; $79.95 kit. Walnut base $19.95..
1. Model 440 two-speed single-belt drive $69.95
2. Model 440K-kit version of above ... $58.00
.

• Laboratory Series Turntable. A new patented turntable designed for playing stereo records. Features large flywheel separate from platter, belt drive, and unusual bearing system.
Specifications: Speeds-33% rpm ; belt drive; hysteresis-synchronous motors ; ure-thane mat. Price, $99.50 with base.

• Stereo Turntable Kit, Model PK 33. Features polyurethane belt, hysteresis-synchronous drive motor, heavy duty oilite bearing, and design to optimize audio quality at minimum consumer cost.
Specifications: Speeds-33% rpm; belt drive; hysteresis-synchronous motor; turntable diameter, 12" ; turntable weTglit, 4 lbs. ; shaft diameter, 1" ; turntable material, aluminum ; neoprene-cork mat; wow, 0.2% ; flutter, 0.08%; dimensions of chassis, 12*4 x 121/4" ; clearance required above mounting board, 1%" ; below, 3%" ; over-all weight, 8% lbs. Price, $49.50 kit. Gray Res. 1. PT 316, assembled turntable on base $89.50

• PK-210W - 4-Speed Transcription Player. Well suited for stereo, the PK-240W is a 4-speed transcription player with a rim-weighted turntable and a rumble and noise figure 50 db below average recorded level. Bach speed is variable within 7% of the nominal value through a magnetic eddy-current brake1.
Specifications: Speeds-16, 33, 45, 78 rpm : rim drive ; 4-pole induction motor ; turntable diameter, 12" ; turntable weight, 3 lbs ; turntable material, aluminum ; mat, rubber ; wow, 0.2% ; flutter 0.2% ; dimensions of chassis, 12*4" x lOMs" ; clearance required above mounting board, l1//' ; below, 4" ; controls, speed, power ; provision for arm mounting, none ; over-all weight, 14 lbs. Price, $37.50.

• Transcription Turntable. Bngineered for the finest music systems, the Thorens Model TD-124 is a four-speed machine featuring a 12-inch, ll^-lb. table. The main table is made of cast iron to provide shielding against hum pickup. A cover table made of aluminum, plus a rubber mat, reduces the attraction of magnetic pickups. Precision-machined, the Thorens Roto-Drive is adjustable ± 3.0 per cent for exact musical pitch. A built-in illuminated strobe allows setting to exact speed while record is playing. Easy levelling is accomplished by means of a built-in level-bubble and easily accessible levelling screws.
Specifications: Speeds-16, 33, 45, 78 rpm ; belt and idler wheel drive ; induction 4-pole motor; turntable diameter, 12" ; turntable weight, 11% lbs. ; shaft diameter, 9/16" turntable material, cast iron, aluminum cover; mat, rubber; wow and flutter below NAB specs ; dimensions of chassis, 15 x 12%" ; clearance required above mounting board, 21/2" ; below, 3" ; type of mounting, rubber grommets; controls, 3; provision for arm mounting, replaceable board ; over-all weight, 22 lbs.
Price, $125.00. Accessories : Wood bases $10.00 to $40.00. Elpa Ind.
1. TD-121 ........................ $85.00
2. TD-111 ........................ $60.00
.

• Synchromatic Turntable-ML-1. A traditionally-styled high-performance turntable for rumble-free constant-speed reproduction of stereophonic and conventional LP records. Synchronous drive motor, direct drive, and smooth, low-friction platter bearings hold wow, flutter, and rumble (10 cps) well below audibility. Entire lightweight system is shock-mounted on 3-cycle suspension system to prevent acoustic feedback or groove skiping due to floor-borne vibrations. Accommodates any lightweight tone arm of average length.
Specification*: Speeds--33 1/3 rpm; rim drive ; hysteresis-synchronous motor ; turntable diameter, 12" ; turntable weight, 12 oz. ; turntable material, aluminum ; Ring support mat; wow and flutter 0.1%; dimensions including base, 16" x 15" x 3 "; provision for arm mounting, 2%" internal clearance.
Price, $59.95.
1. ML-234 two-speed (33 1/3 & 45 rpm) version of ML-1 ..... $74.50
.

.

• Two-Speed Turntable. A two-speed (33% and 45 rpm) turntable, it comes complete with arm, oiled-walnut base, transparent dust cover, cables, and even an overhang adjustment device and stylus-force gauge. Manufacturer states that a condition of sale is that these turntables meet NAB specifications for broadcast equpiment on wow, flutter, rumble, and speed accuracy.
Specifications: Speeds 33% and 45 rpm, belt drive, synchronous motor ; turntable diameter, 11 11/W ; turntable weight, 3.3 lbs; shaft diameter %"; turntable material aluminum; polyurethane mat; wow, 0.15% flutter, 0.05% ; dimensions of chassis, 12% x 16%" ; clearance required above mounting board, 2 9/32" ; below, 2%" ; type of mounting, spring ; controls, on-off; pickup head, universal; material, Acrylic ; number of mounting screwTS for cartridge, 2 ; mounting dimensions, adjustable; number of leads to head, 4; number of leads to chassis,
5. Price $68.00. .
.

• PW-10H. Pushbutton operation for damage-free records and styli. Coupled to this are the design concepts that are found in the best transcription turntables-heavy balanced 12" turntable, hysteresis motor, quality tone arm with frictionless bearings, very low rumble level and many other extras.
Specifications: Speeds-16, 33, 45, 78 rpm; idler drive ; hysteresis-syn. motor; turntable diameter 12''; turntable weight, 6 lbs ; shaft diameter, 9/16" ; turntable material, non-ferrous ; rubber mat; wow, 0.1% ; dimensions of chassis, 14%" x 12%" ; clearance required above mounting board, 5%" ; below, 3%" ; type of mounting, spring; controls, pushbutton; automatic cycling time, 10 sees at 33% rpm, 5 sees at 78 rpm ; type of pickup head, plug-in ; material, high-impact plastic ; mounting dimensions, standard ; number of leads to head, 5 ; number of leads to chassis, 4 ; accommodation for 7", 10" and 12" records.
Price, $99.50. Accessories : extra heads, $5.00, base and cover avail.

• B61 Turntable. Precision made for Bogen by Lenco® of Switzerland. Complete with integrated tone arm, tracks at as low as 1.5 grams. Precise, automatic cueing and con-tinously variable speed are just two features that make the B61 outstanding.
Specifications: Speed-33% rpm; rim rpm plus continuously variable 29-86 rpm ; four-pole motor; turntable diameter, 12"; turntable weight, 7% lbs; turntable material, zinc alloy; rubber mat; wow and flutter, 0.2%; dimensions of chassis, 15%" x 13%" ; clearance required above mounting board, 2%" ; below, 2%" ; type of mounting, spring; controls, speed on-off, play; plug-in pickup head; aluminum ; 4 pins to head, 3 leads to chassis ; over-all weight, 19 lbs.
Price, $64.95. Accessories, base $5.25, dust guard, $5.50..
1. B51 turntable ................... $49.90
.

• Dual-1006 - Four-Speed Changer-Turntable. The Dual-1006 "Custom" is a combination record changer and turntable offering four-speed operation. The "roller-feeler" record indexing action permits intermixing of any size records for completely automatic operation. The platter is laminated and concentrically girdered for increased rigidity. The one-piece tone arm tracks and trips at 2 grams and is adjustable for a wide range of tracking forces. The arm has a built-in tracking-force gauge. A lock-in cartridge holder is provided for use with all standard cartridges. Built-in stereo-mono switch.
Specifications: Speeds-16%, 33%, 45, 78 rpm ; idler drive; 4-pole motor ; turntable diameter, 10.6" ; turntable weight, 3.75 lbs; shaft diameter %" ; turntable material steel; wow, 0.25% ; flutter 0.25% ; dimensions of chassis, 131/4"xl0%"; clearance required above mounting boards, 3%" ; below 3" ; type of mounting, spring; controls, (3) pushbuttons; automatic cycling time, 12 sees at 33% rpm, 12 sees at 78 rpm; cartridge holder bracket ; material plastic ; 2 mounting screws for cartridge; mounting dimensions, std. ; number of leads to head, 4 ; number of leads to chassis, 4 ; all record sizes intermixed.
Price - Dual-1006 - $89.95, extra cartridge holders, $2.10, 45-rpm auto spindle $4.80. SOld by United Audio.

• Anmerkung : Wir sind hier noch im Aug 1963 und der neue DUAL 1009 wurde im April 1963 auf der Industrie-Messe in Hannover mehr oder weniger unerkannt vorgestellt. So richtig aufgemischt wurde die weltweite Plattenspielerbranche erst zur Funkausstellung Mitte August. Warum die Redakteure der US-Audio (und auch der Importeur) das (noch) nicht wußten und/oder nicht publizierten, ist Vergangenheit. Ab dem Jahresende 1963 brach die DUAL Euphorie aus. Genauso wie bei uns heute noch ein Papiertaschentuch "TEMPO" heist, hieß von nun an ein "turntable" einfach nur noch "DUAL" - und das weltweit. DUAL wurde zum Weltstandard für Plattenspieler und viele amerikanische (und weltweit auch andere) Firmen verschwanden vom Markt. Wiederum andere stellten die hoffnungslose Produktion einfach ein.
  

.

• Troubador Model 398. Consists of 208 turntable, 980 arm, walnut base. Motor and turntable individually adjusted to dynamic balance. Rumble isolation provided by motor suspension, flexible belt drive, and resilient nylon seat which supports and cushions the thrust of the main bearing. Lapped-steel shaft- micro-honed bearing well. Rumble less than -63 db.
Specifications: Speeds-33%, 45, 78 rpm ; belt drive; hysteresis motor; turntable diameter, 12" ; fttfhtable weight, 6 lbs ; turntable material, aluminum; rubber mat; wow and flutter, 0.02%; dimensions of chassis, 17" x 15" ; clearance required above mounting board, 3"; below, 4".
Price, $175.00. Accessories: cartridge mount, $1.95..
1. Model 388, same as above less base $160.00
.

• Type A, Laboratory Series Automatic Turntable. A dynamically balanced tone arm with a turntable, the Garrard Type A Automatic Turntable provides the convenience of a changer. The turntable platter is cast, weighted, and polished. The tone arm is adjustable by means of a sliding counterweight. At this point the arm is in gyroscopic balance. Tracking force is adjusted by means of a calibrated gauge on the side of the arm. Utilizing the pusher-platform changing mechanism exclusive with Garrard, the Type A operates as a fully automatic changer when desired.
Specifications: Speeds-33, 45, 78, 16% rpm ; rim drive; shaded 4-pole motor ; turntable diameter, 10%" ; turntable weight, 6 lbs; turntable material, aluminum; rubber-ribbed with chrome insert mat; dimensions of chassis, 16%"xl4%"; clearance required above mounting board, 6"; below, 2%"; type of mounting, barrel springs ; controls, manual and auto on/off; automatic cycling time, 10 sees at 33% rpm, 3% sees at 78 rps ; type of pickup head, plug-in 4 pin ; material, plastic ; mounting dimensions, %" number of leads to head, 4; number of leads to chassis, 5; accommodation for different record sizes.
Price, $79.50. Accessories: extra heads, $1.50; base, walnut, $4.95.
1. AT6 automatic turntable, 4-speed, dynamically balanced tone arm.......$54.50
2. Autoslim/P auto-manual, intermix changer ........................ $39.50
.

• KN-990 Automatic Turntable. Quality automatic turntable, 4 speeds, tone arm accurately adjustable from 0 to 8 grams.
Specifications: Speeds-16%, 33%, 45, 78 rpm ; rim drive; 4-pole motor; turntable diameter, 11" ; rubber mat; dimensions of chassis, 13%" x 12" ; clearance required above mounting board, 4%"", below, 3"; type of mounting, leveling shock nuts, controls, speed, function, tracking weight; type of pickup head, plug in; material, plastic; number of leads to head, 4 ; number of leads to chassis, 2 cables. Price, $49.95. Allied Radio.

• PL-4U Turntable with Arm. The PL-4U turntable with tone arm is a well-designed unit designed to meet professional requirements. It uses a precision-engineered fourpole hysteresis-synchronous motor with a sturdy die-cast turntable adjusted to perfect dynamic balance, and features a precise automatic cueing system. The tone-arm is tubular and is manufactured to rigid specifications for minimum tracking error and no resonances.
Specifications: Speeds-33, 45, 78 rpm ; rim drive; 4-pole hysteresis-sychronous motor; 12" turntable; light metal alloy; wow and flutter-less than 0.17%, ±0.05%; dimensions - 17" x 13" x 8" ; total weight-12 lbs. Pioneer.
.

• Model 800B Stereotaxic Gyropoise action, the only turntable with magnetic suspension, the platter actually floats on air, eliminating vertical rumble. Unified arm and platter suspension eliminates mechanical feedback. Rigidly mounted motor allowing the base to dissipate vibration. Separate arm mounting board allowing easy access to tone arm receptacles. Unique magnetic arm-board mounting.
Specifications: Speeds-33 rpm ; puck drive ; synchronous motor; turntable diameter, 11 27/64" ; turntable weight, 2 lb. 7 oz.; shaft diameter, 9/32" ; turntable material, alum. ; rubber mat; wow, 0.04% ; flutter 0.05% ; dimensions of chassis, 14%xll% ; clearance required above mounting board, 1%"; below, 3"; controls, on-off; Stanton 400A cartridge; mounting dimensions, %" ; number of leads to head, 4; number of cables to chassis, 2.
Price, $129.95. Stanton Magnetics.
.

• TD-224. Here is the ultimate in high fidelity quality and convenience - a fine 2-in-l Swiss instrument that combines all the benefits of a professional turntable with all the conveniences of an automatic record changer. More than five years in development, the TD-224 meets the standards of the most ardent and discriminating perfectionist. It combines the essence of a TD-124 with an automatic changing mechanism of unusual design.
Specifications: Speeds-16, 33%, 45, 78 rpm ; belt and idler drive ; 4-pole motor ; turntable diameter, 12" ; turntable weight, 8 lbs ; shaft diameter, %" ; turntable material, non-ferrous ; rubber mat; wow and flutter below NAB ; type of mounting, rubber grommet; controls, 4 ; type of pickup head, plug-in ; material, aluminum ; std. cartridge ; mounting dimensions, std. ; number of leads to head, 4 ; number of leads to chassis, 5 ; automatic intermix for 7", 10", 12" records.
Price, $250.00. Accessories : extra heads, $5.00; bases, $30/ 45. Elpa Ind.
.

• Low-Silhouette Turntable Series, ML-66-A. Low-silhouette turntable complete with viscous-damped universal tone arm. "Plug-in head accepts any make cartridge, micrometer adjustment for normal range tracking forces. Base and tone arm of non-resonant walnut in oiled or ebony finish.
Specifications: Speeds-33% rpm; rim drive ; 2 hysteresis-synchronous motors ; turntable diameter, 12" turntable weight, 11 oz. ; turntable material, aluminum; ring-support mat; wow and flutter, 0.04% ; dimensions, 15 15/16" x 14 1/16" ; type of mounting, self-contained cabinet; number of leads to head, 4 ; number of leads to chassis, 5.
Price, $99.50. .
1. K-66 turntable with integ. arm and LDM cartridge ..................$129.50
2. K-66 pickup system with preamp .. $195.50
3. K-803 pickup system with preamp... $ 189.45"
4. K-834 two-speed (33-1/3 Cr 45 rpm) version of K-803 ................$204.00
.