Sie sind hier : Startseite →  Hifi Wissen und Technik→  Quadro - Geräte→  Stereo Review Quadro-Geräte 1974→  5. US Quadro-Decoder 1974

1975 EDITION - 4-CHANNEL EQUIPMENT
Decoders, Demodulators and other

Und hier die letze Rettung für alle, die kein Geld mehr hatten. Das waren die separaten Decoder, die man vor vorhandene Anlagen schalten konnte. Das neue Abtastsystem bzw. den befähigten Plattenspieler für die CD-4 Technik mußte man aber dennoch kaufen.

Nur ganz wenige Produkte hielten, was sie versprachen und brachten eine erstaunliche Qualität der Hifi-Wiedergabe. Das Quadro-Erlebnis enttäuschte bereits nach ganz kurzer Zeit, egal, welches System man auserwählt hatte.
Diesen 1975er Haupt-Katalog finden Sie hier.

.

AUDIONICS - 106C High-Definition SQ Decoder

Features discrete 4-channel and stereo inputs, tape monitor, duplicated DIN and RCA inputs and outputs. Close-tolerance phase-shift network, 20-18,000 Hz ±10 degrees (typically 6 degrees). Response 5-100,000 Hz ±1 dB. THD 0.025% S/N -80 dB with only 250 mV signal in. Low-impedance output for placement up to 100 feet from control amplifiers. Switchable blend for up-date for full logic. Wired and tested.
.................................$99.95

AUDIONICS - 106B

Same as 106C except less case and trim panel. For special installation. Wired & tested.
..............................................$74.95
Trim Panel & knobs................. $8.95

CONCORD - CSQ-2-4 SQ Decoder

Designed specifically to reproduce SQ matrixed program material. Will also synthesize regular 2-channel stereo records. Gain 1.3 dB. Response 20-20,000 Hz. Input imp. 1 megohm. Dist. 1% THD max. Must be connected at output of a preamp. 3V/ H x 93// W x 7" D. Walnut cabinet
.......................... $87.95

DYNACO - Quadaptor

The simplest type decoder for recovering 4-channel information from 2 channels. Does not require two additional power amplifier channels. Provides level adjust for rear speakers. Unit connects between speakers and power-amp outputs. Is a passive device.
Kit....................................$22.50
Assembled........................$29.95

ELECTRO-VOICE - EVX-44 Universal 4-Channel Decoder

Automatically provides correct decoding of all types of matrixed 4-channel program material. Provides optional front-to-rear separation enhancement. Connects into hi-fi system between preamp & power amp or through tape jacks. Has inputs for 2- and 4-channel tape sources. (S + N)/N 70dB . Gain is unity. Maximum input 4 V rms. Response 20-20,000 Hz ±ldB.
........................$99.95

FISHER - TX-420 4-Channei Converter

Designed to be used with present stereo systems to provide 4-channel reproduction. Has 4-channel preamps and 2-channel stereo power amp. Includes a 4- or 2-channel 8-track cartridge player and decoding (matrixing) system for producing 4-channel material from 2-channel conventional or encoded sources. 18 W/ch (2 channels) dynamic power into 8 ohms (15 W/ch continuous) at 0.5% HD. Power bandwidth 30-20,000 Hz. Sensitivity: tuner & aux. inputs 200mV.
................... $299.95

GENERAL ELECTRIC - QA40 4-Ch Decoder/Amp

For use with 2-ch systems with decoder jacks; had 3-pos. selector switch for discrete 4-ch, matrixed 4-ch, and synthesized 4-ch; built-in SQ decoder & 4-ch synthesizer circuit; input jacks for radio, tape, phono, and CD-4 signal sources
...........................$99.95

HARMAN/KARDON - 44+ CD-4 Demodulator

Outboard demodulator for use with multi-channel receivers without built-in CD-4 capability; uses same circuitry as the company's 700+, 800+, and 900+ four-channel receivers; response 20-10,000 Hz ±1.5 dB (-5dB at 15,000 Hz); S/N 60 dB (CD-4 "on"), 65 dB (CD-4 "off"); channel separation 20 dB; phono input sensitivity 2 mV; input impedance 100,000 ohms ±10% with 30 pF; output impedance 2000 ohms. Enclosure designed to match company's multi-channel receivers.
...........................$119.95

HITACHI - IMA-40 Integrated Rear Amplifier

Converts 2-channel stereo system into 4-channel (discrete, SQ, RM). 13 W/ch rms; 5.5 W/ch rms at 25-35,000 Hz and 1% THD, 8 ohms). Features joystick 4-channel balance control, speaker switch, and tape monitors for 2- and 4 channels
.......................$239.95

JVC - 4DD-5 4-Channel Demodulator

Designed to be used with the CD-4 four-channel system. Can be added to any existing 2-channel turntable & 4-channel reproducing system. Input 1.5 mV at 100,000 ohms impedance. Output 300 mV at 5000 ohms impedance. Response 20-16,000 Hz. Separation semi-adjustable.
............$129.95

LAFAYETTE - LA-524 4-Channel Decoder/Amplifier

Designed to convert regular 2-channel stereo systems into discrete and SQ matrix 4-channel stereo systems. Features built-in SQ decoding circuit for playback of Columbia and other SQ-decoded discs; firm's 4-channel matrixing circuit for regular 2-channel stereo program sources. Requires separate 2-channel amp & speakers. Features master front-and rear-volume control. Has fused speaker outputs, 6 1/2 W rms/ch into 8 ohms at 1% THD (50-20,000 Hz) both channels driven
................$59.95

LAFAYETTE - SQ-M 4-Channel Decoder

For reproducing 4-channel sound. Includes the company's "Composer Circuit" (similar to Dy-naco system) to convert conventional 2-channel stereo sound sources into 4-channel reproduction. Also includes CBS matrixing circuits for playback of CBS 4-channel SQ Quadraphonic records. Has simulated walnut-finished case
..................$24.95

LAFAYETTE - QD-4 4-Channel Adapter

Synthesizes 4-channel sound from regular 2-channel stereo records, tapes. Does not require an additional stereo amplifier. Has 4-position function switch, rear level control, phono jacks
............$14.95

LAFAYETTE - 4-Channel Adapter for Cars

Derives 4-channel sound from present 2-chan-nel car stereo tape system or FM radio. Front panel contains rear-level speaker control, 2- or 4-channel mode switch, and front (L & R) speaker-level controls. If present system has four speakers, only adapter is required; if two speakers, two more speakers must be added. For 12-V negative ground systems. Includes two 3-ft, two 6-ft., and two 15-ft. connecting cables. ........................$5.95
LAFAYETTE - 99-62994. Pair of 3" x 5" matching rear deck speaker systems....................$7.95

LAFAYETTE - SQW Decoder

Features full SQ logic (front/back logic and wavematching logic). Will also handle RM and other matrixes; derives 4-ch sound from 2-ch program sources. Has 2- and 4-ch inputs. Outputs: two sets of 4 outputs for decoded or discrete; 2-ch tape outputs. Controls: power "on-off", master volume, function switch tape/source, power indicator, tape/source indicator, and tape and source sensitivity slide switches
........................$109.95

MARANTZ - SQA-2 Full-Logic Decoder

Full-logic SQ decoder featuring wave-matching and variable blend; separation of up to 20 dB; designed to fit into special under-chassis slot of company's Quadradial receivers
..................... $79.95

MARANTZ - CD-400 Demodulator

Designed to be used with any 4-channel receiver; phase-lock loop for the 30kHz carrier signal; built-in noise reduction circuits for each channel; has rear-channel calibration controls & CD-4 calibration disc; features auxiliary set of 4-channel inputs; front-panel Aux. push switch
.....................$139.95

SONY - SQD-2020 4-Channel Decoder

Designed as a control center for 4-channel discrete tapes and has built-in SQ full-logic (gain-riding) matrix decoder. Features four VU monitor level/balance meters. (S+N)/N 80dB. HD 0.1%. Sensitivity: input & 4-ch. 1, 2 250 mV; Rec/PB 2 & 4-ch. tapes 750 mV. Output: front 500 mV, back 550 mV & 2V.
..............$229.50

TEAC - AN-300 4-Ch. Dolby Noise Attenuator

Has four separate Dolby-B type noise-reducing systems within a single housing. Features four VU meters. With channels operated in pairs the unit affords simultaneous decoded stereo monitoring or full 4-channel Dolby encoding. Has a standard 400-Hz recording calibration tone on all four channels and a 420-Hz pulse circuit for easy identification of the calibration tone. Increased (S + N)/N of 10 dB at 10,000 Hz (5 dB at 1000 Hz). Sensitivity: tape and line 0.1 V. Outputs: record and monitor 0.3 V. Has multiplex filter. Response 20-20,000 Hz ±1.5 dB.
...........$399.50

TEAC - AX-300 4-Channel Mike/Line Mixer

Has a preamplifier and features inputs for six low-impedance microphones (four circuits mike/line switchable and two circuits mike only). Has a six in and four out format. (S + N)/N is -62dB (-72dB line); mike (600 ohms balanced) input 0.1 V max.; line input 0.3 V (7 V max.)
......$429.50

TECHNICS BY PANASONIC - SE-405H CD-4 4-Ch. Demodulator

Low-distortion, high separation demodulator for playback of CD-4 discrete 4-channel recordings. Includes 4-channel semiconductor cartridge for mounting in any standard tonearm and will also play 2-channel and all other discs. Phono cartridge response d.c. to 50,000 Hz. Demodulator audio response 20-16,000 Hz. Built-in equalizer/preamps. Inputs: phono #1 (semiconductor cartridge) 3 mV; phono #2 (magnetic cartridges) 1.5 mV. Input impedances: phono #1 4700 ohms, phono #2 100,-000 ohms. Output 300 mV. Has 3-position mode selector including 4-Chan. Auto for demodulating CD-4 records or automatically switching to 2-channel stereo, depending on record being played; 4-Chan. Aux.; Conventional Stereo; Indicator automatically lights to indicate playing and demodulation of CD-4 record. Separation adjustment
...................$159.95

TECHNICS BY PANASONIC - SH-3433 4-Channel Audio Scope

3-inch screen to view all 4-channel signal levels & phase relationships. Connects either at speaker terminals or outputs of any preamp.
..................$259.95

TOSHIBA - SC-410 4-Channel Adapter

Designed as a 2-channel stereo system with 15 W/ch rms continuous power for use with any conventional 2-channel stereo system to provide 4-channel sound reproduction. Can be used with both discrete or matrix inputs. Has matrix decoding circuits similar to Dynaco system. Will extract out-of-phase material from a 2-channel program source or any 4-channel encoded material. Features four choices of multi-channel listening: "Concert Hall," "Studio," "Surround," and "Stage;" apparently derived from variations in mixing and high-frequency roll-off
................... $169.95

ZENITH - E9029 4-Channel Adapter

When used with stereo receiver permits 4-ch matrixed records, 4-ch tapes & 4-ch FM stereo broadcasts to be played; requires two additional speakers. Grained-walnut enclosure.
..............$89.95

- Werbung Dezent -
Zurück zur Startseite © 2007/2024 - Deutsches Hifi-Museum - Copyright by Dipl.-Ing. Gert Redlich Filzbaden - DSGVO - Privatsphäre - Zum Telefon der Redaktion - Zum Flohmarkt
Bitte einfach nur lächeln: Diese Seiten sind garantiert RDE / IPW zertifiziert und für Leser von 5 bis 108 Jahren freigegeben - Tag und Nacht und kostenlos natürlich.

Privatsphäre : Auf unseren Seiten werden keine Informationen an google, twitter, facebook oder andere US-Konzerne weitergegeben.