Sie sind hier : Startseite →  Hifi Magazine + Zeitschriften→  (32) US "off duty"→  US off duty - 1975-intro→  off-duty-1975-12 - Turntab. Intro

"off duty" 1970 - 1997 - eine Freizeit-Zeitung für's US-Militär

Die in diesem amerikanischen (Freizeit-) Shopping-Magazin angepriesenen Hifi- und Video-Produkte waren auschließlich amerikanischen und kanadischen Militärangehörigen zugänglich - also zu kaufen - und vor allem zu ganz ungewöhnlich (verblüffend) niedrigen US $ Military-Preisen. Zu der einführenden "off duty" Seite geht es hier lang. -  Um 1970 begann der weltweite Hifi-Boom bis zum 1. Crash 1978 und dann wieder zum 2.Crash um 1990. Über die 20 Jahre nach 2001 lesen Sie mehr auf dieser japanischen Seite.

.

Ein riesiges Angebot an Plattenspielern - und nur für Militäry

Wie bereits öfter wiederholt, das sind nur die Modelle, die in den amerikanischen Verkaufsstellen für Militärangehörige in Europa gelistet waren. Ob die wirklich alle auf Lager waren, konnte sowieso niemand nachrecherchieren.

Auf jeden Fall hätten beim Anblick dieser Liste jedem DUAL-, ELAC-, PE- und PHILIPS- Marketing Mann die Haare zu Berge stehen müssen. Die Japaner kamen mit gnadenlosen Preisen um die halbe Welt bis nach Rotterdam oder Bremerhaven geschippert und kosteten dann immer noch nur die Hälfte von unseren deutschen Produkten.

Und dann noch ein Blick auf die off-duty Werbung von 1970 bis 1974, insbesondere die einfallslose Werbung von DUAL und ELAC. Das konnte auf Dauer nicht erfolgreich sein.

.

Pickin' and Spinnin'

"What to look for when buying turntables, phono cartridges and compact systems" - By LARRY MYERS in Off Duty / Europe / December 1975

Sagst Du "Hifi", denkst Du an Schallplatten

MENTION "HI-FI" and the first thing that comes to mind is records. True, you can have a great audio system without records if you are content with listening to radio stations or pre-recorded tapes. But for most of us hi-fi and records go together like bacon and eggs.

In this OFF DUTY Shopper we are going to take a look at the equipment you need to play records, from turntables and pickup cartridges intended for use as part of component audio setups, to all-in-one compact systems that include turntables, electronics and speakers. If you enjoy playing records, whether on a $3,000 component rig or a $100.00 compact system, you should find the following paragraphs helpful in making your selection.

Am einfachsten kaufst Du ein "Compact System

If you buy a compact system you don't have to worry about choosing a turntable, the manufacturer has done it foryou, selecting a unit that is compatible with the rest of the system. However, you may find it helpful to know just what you're getting, so study the next several paragraphs before you make a decision. Of course, this information applies to separate turntables, too.

Types of turntables.

In hi-fi's early days there were two basic types of turntables - record changers and manuals. The early changers played a stack of records automatically but their heavy tone arms and cumbersome mechanisms didn't appeal to the audiophile. They turned instead to manual turntable designs, with separate tone arm, that offered better performance and were also easier on records than the changers of the era.

As demand for more sophisticated audio products grew, changer makers began refining their equipment and soon the term "record changer" no longer seemed appropriate for a unit with performance equal to or better than that of earlier manuals.

So, the name "automatic turntable" was adopted. Although today there's still some semantic confusion, you'll find that four basic types of turntables have evolved from previous manuals and automatics.

Automatic turntable/changers.

These units play a stack of records in sequence without any intervention by you. They also play just one record automatically if you wish, lowering the tone arm onto the record, lifting it off at the end, returning the arm to the rest and shutting off the motor.

Automatic turntables.

These play only one record, not a stack. However, they, too, lower and lift the tone arm, returning it to the rest and turning off the motor.
.

Semi-automatic turntables.

Similar to automatic turntables except that you manually lift the tone arm and place it in the lead-in groove at the beginning of the record, usually with the aid of a cuing lever. When the record has finished playing, the tone arm automatically lifts and the unitshuts off.

Turntables.

You do everything manually, from turning the unit on through turning it off. Some, but not all, models switch on the motor as you lift the tone arm. Most turntables come with a built-in tone arm but there are several models available that permit you to install a separate arm of your choice.

Motors.

There are three common types of turntable drive motors. Induction and synchronous types have been used with good results for years. However, the speed of induction motors may vary with changes in the power line voltage, while synchronous motors may vary their speed if power line frequency should change. With brownouts still mentioned as a possibility in the States, these characteristics are something to keep in mind.

Electronically controlled motors are the latest type. Special circuits monitor and adjust motor speed continuously for pinpoint accuracy regardless of minor changes in line voltage or frequency. This superior performance naturally carries a superior price.

Drive systems.

There are also three basic types of drive systems. Direct drive, using a low-speed, electronically-controlled motor, is the latest method. The turntable platter itself is directly attached to the motorand rotates with it. Wow, flutter and rumble are usually very low with such a system. Belt drive and idler drive are older methods, but each has proven satisfactory.

Belt drive systems usually do a fine job of isolating motor noise from the turntable, but sooner or later belts must be replaced. Idler drive, which transmits power to the platter via rubber wheels, is still the most popular drive system.

Flutter and wow.

Both refer to unwanted variations in the speed of turntable rotation. Flutter is a relatively short-term variation and results in a fluttering sound, while wow involves somewhat longer-term changes. The less of both, the better. Figures below 0.15 per cent are acceptable, but most units today have 0.10 per cent or less flutter and wow.
.

Rumble.

Low-frequency noise generated by the operation of the turntable is called rumble. As the name suggests, this may be perceived as a rumbling sound. Or, it may be of such a low frequency that it is inaudible. In the latter instance, however, it may create unusual movements of the speaker's cone, and thus interfere with the proper reproduction of other sounds.

Look for a 45 dB or higher rumble figure. (Rumble figures may be given as a positive or negative number. Either way, the greater the figure itself, the less the rumble.)

Platter weight and size.

Opinions vary as to the importance of weight, but the most widely voiced belief is the heavier, the better. Others feel that weight is of little concern with today's sophisticated speed regulation and drive systems. As to the size, a 12-in. record is obviously more fully supported on a 12-in. (or larger) platter than on a smaller one.
.

Tone arms.

The tone arm is a vital part of the total system, especially now with the increasing use of low mass cartridges operating at exceptionally low tracking forces. Most of today's tone arms offer features designed to allow for critical adjustments of cartridge overhang and height, vertical balance and horizontal balance (including anti-skate properties) to prevent the uneven wear of the inside walls of record grooves caused by the natural tendency of a pivoted arm to move toward the center of a rotating disc. A few manufacturers offer straight-line tracking or articulating arms which eliminate this kind of error.

Cartridges.

The cartridge/stylus assembly converts the undulations or "wiggles" in the record groove into electrical signals which are then used by the rest of the system. If the output of your cartridge is distorted, the resulting sound will suffer regardless of how well the other parts of your sound system perform.

The job of the cartridge isn't an easy one. The undulations in a record groove physically correspond to the frequency of the recorded sound. That is, if a 5,000 Hz tone is recorded for one second,the stylusand cartridge mustfollow 5,000 undulations in one second to faithfully reproduce the original sound.

A cartridge's ability to accurately produce the electrical equivalent of the complex undulations in a record is called trackability. It is usually expressed in terms of the highest velocity, for example, 20 centimeters per second (20 cm/sec), at which a cartridge/stylus can move at a particular frequency while maintaining accurate reproduction.

At present, not many manufacturers advertise their trackability figures, largely because the public is better acquainted with compliance, which indicates the ease with which the cartridge/stylus moves. Compliance figures are expressed in terms of the amount of movement in centimeters (cm) per unit of force (dyne) applied.

A typical figure might appear as 25 x 10-6 cm/dyne. The higher the figure, the greater the compliance and the smaller the a mount of force needed to move the stylus. As a rule, compliance should be at least 20-25 x 10-6 cm/dyne or higher.

Tracking force.

Refers to the downforce (in grams) (Anmerkung : Die Amerikaner nehmen das nicht so ernst, das mit den Einheiten für Gewicht und der Kraft - downforce -, darum ist es hier so falsch belassen, wie es nun mal da steht.) that should be applied in order for the cartridge to do its job properly. Tracking force is usually given as a range, say from 1 to 1.5 grams.

In general, cartridges designed to track at higher downforces are physically better able to stand abuse, but produce somewhat more record wear. Lighter tracking cartridges cause less wear, but must be handled somewhat more carefully to prevent damage. The better the turnable, the more satisfactorily it should handle a sensitive cartridge.

Also keep in mind that multi-radial CD-4 styli, such as the Shibata, have a larger record groove contact area and hence can be tracked more heavily without harming your records.

Frequency response.

Most cartridges will respond to groove modulations over a range from 20-20k Hz. Since that represents the normal extremes encountered on most records, it is a satisfactory range. Of course, even wider response, say from 15-25kHz, is relatively common these days. With CD-4 cartridges, which must reproduce the high frequency carrier signal for the rear channels, frequency response upper limits of 45-50k Hz are necessary.

When choosing a cartridge, make sure its recommended tracking force is compatible with that of your tone arm. Some arms may not be able to properly handle cartridges designed to track at very light pressures. At best such a combination won't produce the kind of quality sound you paid for, and at worst it may damage your cartridge or records.
.

Styli.

The "stylus" of a cartridge is what was once commonly refered to as the "needle". Virtually all top quality styli are diamond. There are three basic shapes of styli - spherical, elliptical and tri-radial. As a general rule an elliptical or "bi-radial" stylus will provide a better frequency response and less distortion than the spherical type. A cartridge with an elliptical stylus, however, must have a lighter tracking force to prevent record wear.

4-channel turntables.

CD-4 disc reproduction requires not only the use of special cartridges and styli, but also special low-capacitance wiring. This is because the high frequencies involved are poorly conducted by normal wiring.

Thus, if conventional cables are used the CD-4 carrier signals may be lost and with them the 4-channel effect. If you aren't ready for quad now, but think you might be soon, then keep low-capacitance wiring in mind.

Special features.

Among the non-essential but useful features, many units provide cuing controls for gentler, more accurate raising and lowering of tone arms. Many of these devices eliminate potential damage resulting from dropped arms through the use of viscous damping. Another feature which may prove useful to musicians who wish to play along with recordings is variable speed control.

Compact Systems.

As we mentioned earlier, a compact system consists of: a turntable of some sort, complete with tone arm and (in most cases) pickup cartridge; the necessary electronics, including preamplifier and amplifier; and, speakers. Compact systems are available in stereo and quadraphonic models, with many stereo units designed for conversion to 4-channel with the addition of two more speakers.

Like the "record player" that you may have toyed with as a youngster, the modern compact systems asks little more than that you plug it in and switch it on. Despite this ease of operation the better compact systems offer excellent fidelity. You aren't limited to playing records, either. Most of the units in our listings include an AM/FM-stereo tuner and some also feature cassette or 8-track cartridge units.

.

- Werbung Dezent -
Zurück zur Startseite © 2007/2024 - Deutsches Hifi-Museum - Copyright by Dipl. Ing. Gert Redlich Filzbaden - DSGVO - Privatsphäre - Zum Telefon der Redaktion - Zum Flohmarkt
Bitte einfach nur lächeln: Diese Seiten sind garantiert RDE / IPW zertifiziert und für Leser von 5 bis 108 Jahren freigegeben - kostenlos natürlich.

Privatsphäre : Auf unseren Seiten werden keine Informationen an google, twitter, facebook oder andere US-Konzerne weitergegeben.